Datasheet

E-126 www.recom-electronic.comREV: 0/2013
RS0
Input Voltage Range 2:1 and 4:1
Output Voltage Accuracy ±2% typ.
Line Voltage Regulation 2:1 ±0.2% max.
4:1 ±0.5% max.
Load Voltage Regulation 2:1 ±0.4% max.
(10% to 100% full load) 4:1 ±0.5% typ.
Minimum Load 0%
Output Ripple and Noise (20MHz limited) 50mVp-p max.
Operating Frequency 2:1 200kHz min. / 500kHz max.
4:1 100kHz min. / 800kHz max.
Efficiency at Full Load See Selection Guide
Quiescent Current RSO-05xxS_D, SZ_DZ 40mA typ.
Nominal input Voltage RSO-12xxS_D 32mA typ.
(Standard, /H2 and /H3) RSO-24xxS_D, SZ_DZ 25mA typ.
RSO-48xxS_D, SZ_DZ 15mA typ.
CTRL Pin drive current /see Notes) 3mA typ, 6mA max.
Quiescent Input Current when Converter is OFF 10mA max.
Isolation Voltage Standard (tested for 1 second) 1000VDC
(rated for 1 minute) 500VAC / 60Hz
/H2 Version (tested for 1 second) 2000VDC
(rated for 1 minute) 1000VAC / 60Hz
/H3 Version (tested for 1 second) 3000VDC
(rated for 1 minute) 1500VAC / 60Hz
Isolation Capacitance Standard 2:1 Single 10pF min. / 40pF typ. / 60pF max.
Isolation Capacitance /H2 and /H3 2:1 Single 5pF min. / 30pF typ. / 60pF max.
Isolation Capacitance Standard 2:1 Dual 120pF min. / 170pF typ. / 250pF max.
Isolation Capacitance /H2 and /H3 2:1 Dual 5pF min. / 30pF typ. / 60pF max.
Isolation Capacitance Standard 4:1 Single/Dual 200pF max.
Isolation Capacitance /H2 and /H3 4:1 Single/Dual 30pF max.
Isolation Resistance >1GΩ min.
Short Circuit Protection Continuous
Operating Temperature Range (free air convection) -40°C to +85°C (see Graph)
Storage Temperature Range -55°C to +125°C
Relative Humidity 95% RH
Package Weight 4.7g
Packing Quantity 22 pcs per Tube
MTBF (+25°C) using MIL-HDBK 217F 1685 x 10
3
hours
(+85°C) using MIL-HDBK 217F 254 x 10
3
hours
Specifications (Core Operating Area) measured at T
A
= 25°C, nominal input voltage, full load and after warm-up time unless otherwise specified
ECONOLINE
DC/DC-Converter
Typical Application
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60%
80%
20%
20
60
80
Total Output current (%)
2405
2412
2409
2415
RSO-24xxS
}
Detailed Information see
Application Notes chapter "MTBF"
RSO-S_D(Z)
Series
-Vin
-Vout
+Vout
+Vin
RSO
10µF input MLCC
capacitor
required for
RSO-12xxSZ_DZ
only.
Vin+
Vin-
CTRL
Vout+
Vout-
Leave CTRL pin
floating if not
used
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60%
80%
20%
20
60
80
Total Output current (%)
1205SZ
RSO-1205SZ