Specifications

30
DRIVE STATUS TABLE
DISPLAY DESCRIPTION
STOP Drive is in STOP mode - No output to the motor.
RUN Drive is in RUN mode and is within ± 3 Hz of the speed
setpoint.
FAULT Drive has shut down due to a FAULT condition. If the fault
condition has passed, pressing the STOP key will clear the
fault and return the drive to the STOP mode.
LOCK Drive is in FAULT LOCKOUT after five unsuccessful restart
attempts.
BRAKE DC BRAKE is energized.
LIMIT Drive is in CURRENT LIMIT due to an overloaded motor, or
ACCEL is set too fast.
F DEC Drive is in DECEL FREEZE because DECEL is set too fast.
The following table shows the possible DRIVE STATUS indications that can appear on the
drive display: