Specifications

33
SPEED REFERENCE SOURCE TABLE
DISPLAY DESCRIPTION
KEY KEYPAD - UP and DOWN arrow keys.
VDC 0 - 10 VDC analog input at TB-5A (In PID mode, this
indicates that the SETPOINT reference is a 0-10 VDC
signal).
IDC 4 - 20 mA analog input at TB-5B (In PID mode, this indicates
that the SETPOINT reference is a 4-20 mA signal).
SP#1 PRESET SPEED #1
SP#2 PRESET SPEED #2
SP#3 PRESET SPEED #3
SP#4 PRESET SPEED #4
MKB MANUAL KEYBOARD - UP and DOWN arrow keys are used
for speed control. This occurs in PID mode when the drive is
in MANUAL mode.
AKB AUTO KEYBOARD - UP and DOWN arrow keys are used as
the SETPOINT reference. This occurs in PID mode when the
drive is in AUTO mode and no other setpoint reference is
selected.
The table below shows the possible SPEED REFERENCE SOURCE indications for the
CONTROL display in the auxiliary mode: