Specifications

1.0 GENERAL
1.1 PRODUCTS COVERED IN THIS MANUAL
This manual covers the Minarik AC400 Series Variable Frequency Drive.
1.2 PRODUCT CHANGES
Minarik Corporation reserves the right to discontinue or make modifications to the design of
its products without prior notice, and holds no obligation to make modifications to products
sold previously. Minarik Corporation also holds no liability for losses of any kind which
may result from this action.
1.3 UNCONDITIONAL WARRANTY
Minarik Corporation warrants the AC400 Series AC motor control to be free of defects in
material and workmanship for a period of eighteen months from the date of sale to the user,
or two years from the date of shipment, which ever occurs first. An AC400 Series control, or
any component contained therein, which under normal use, becomes defective within the
stated warranty time period, shall be returned to Minarik Corporation, freight prepaid, for
examination (contact Minarik Corporation for authorization prior to returning any product).
Minarik Corporation reserves the right to make the final determination as to the validity of a
warranty claim, and sole obligation is to repair or replace only components which have been
rendered defective due to faulty material or workmanship. No warranty claim will be
accepted for components which have been damaged due to mishandling, improper
installation, unauthorized repair and/or alteration of the product, operation in excess of
design specifications or other misuse, or improper maintenance. Minarik Corporation makes
no warranty that its products are compatible with any other equipment, or to any specific
application, to which they may be applied and shall not be held liable for any other
consequential damage or injury arising from the use of its products.
This warranty is in lieu of all other warranties, expressed or implied. No other person,
firm or corporation is authorized to assume, for Minarik Corporation, any other
liability in connection with the demonstration or sale of its products.
1.4 RECEIVING
Inspect all cartons for damage which may have occurred during shipping. Carefully unpack
equipment and inspect thoroughly for damage or shortage. Report any damage to carrier
and/or shortages to supplier. All major components and connections should be examined for
damage and tightness, with special attention given to PC boards, plugs, knobs and switches.
2