Specifications

39
15.0 AC400 CONTROL WIRING DIAGRAMS
15.1 AC400 TERMINAL STRIP
Shown below is the terminal strip on the main control board, along with a brief description
of the function of each terminal. Wiring shown above the terminal strip indicates internal
wiring on the main control board.
A complete description of operating the drive in the REMOTE mode can be found in Section
14.2. The following diagrams provide a quick reference to wire the drive for the most
common configurations.
NOTE
The function of terminals TB-10A, TB-10B, TB-13A, TB-13B, TB-13C, TB-13D, TB-14,
TB-15, TB-16, and TB-18 are dependent on the programming of certain parameters. In
most cases, the name of the parameter matches the number of the terminal, allowing quick
and easy programming of the terminals to suit the application. The exception is TB-16 and
TB-18, which are governed by Parameter 54 - RELAY.