Specifications

16.2 PARAMETER ACCESS USING SPEED DIAL

SPEED DIAL is used to access parameters quickly using the parameter number. Once

accessed, the parameter can be programmed as described in Section 16.1. SPEED DIAL is

accessed by pressing the AUTO/MAN key while in the PROGRAM mode. This will

activate the SPEED DIAL display as shown below:

Once in SPEED DIAL, the UP and DOWN arrow keys will allow the operator to scroll

through the parameter numbers. The display will continue to show SPEED DIAL while

scrolling through the parameter numbers, as shown below:

When the desired parameter is reached, the SPEED DIAL display will be replaced by the

parameter name:

Once the desired parameter is displayed on the screen, press the ENTER key to display the

parameter name and present setting. The parameter setting can now be changed by the

method described in Section 16.1. Press the AUTO/MAN key to return to SPEED DIAL.

NOTE: SPEED DIAL is only active in AC400 drives which have the Modbus serial

communications protocol. Units that have the Metasys protocol do not have this feature.