User's Manual

14
Network Settings(Continued)
Wired Network Setting ( )Internal router
Select Easy Setup Wizard
Select Gateway
Next
There are five methods to connect with network,
choose your preferred one.
Recommended to select the DHCP Client connection.
Automatically obtain IP information from your ISP.
If all Internet IP information is provided by
your ISP, then choose Static IP.
Automatically obtain IP information from
your ISP. If your ISP doesn’t provide a designated IP
for you, then choose DHCP Client.
Ethernet Point to Protocol. Your ISP will
provide you with Login ID and password. Usually this
option is applicable to DSL service.
Point to Point Tunneling Protocol. Your ISP will
provide you with Login ID and password.
Layer 2 Tunneling Protocol. Your ISP will
provide you with Login ID and password. Usually this
option is applicable to DSL service.
Static IP:
DHCP Client:
PPPOE:
PPTP:
L2TP:
Method 1: Easy Setup Wizard
Input the default UserName: admin, skip the
default password setting as there is no default
password, then press Login button login.
Password Setting Format
WiFi Password of Internal
Router in the IFP.
(Password should be set at
least 8 characters. )
Finished
Changed setting successfully.
Get IP,