User's Manual

Menu List
21
Source Auto Switch
Select On to automatically recognition source.
Setting
Color Range
Display Date and Time.
Date / Time
Set Off timer to switch the IFP to standby at a specified time.
Off Timer
Set On timer to turn on the IFP automatically to source at a
certain time.
On Timer
Set the duration of time until the IFP automatically goes into
Standby mode.
[Off] / [10 Minutes] / [20 Minutes] / [30 Minutes] / [60
Minutes] / [90 Minutes] / [120 Minutes] / [180 Minutes] / [240
Minutes].
Sleep Time
Menu Timeout
Select OSD menu display time.
Movie Mode
Turn on/off the movie mode.
HDMI_ARC
MHL Auto Switch
The default password is 0000.
Select On to turn on enable HDMI_ARC.
Select On to automatically switch to the MHL input when it
connected.
Select color range. (Only for HDMI channel)
Adjusting Setting menu
Adjusting Lock menu
HDMI EDID Ver.
Select HDMI EDID Ver. (Only for 4K model)
Lock
Set Password
Password settings.
Change Logo
Select Change Logo item to access and change Logo.
Note: 1. Save the logo which you are about to change in the USB
stick. The logo file sizes should be <512K, and rename it
as boot0.jpg.
2. Insert the USB stick into the USB port on the Android
board.
Power on Source
Power on Source Setting, in MEMORY mode, when the IFP
powered on, it will automatically switch to the source when it
powered off last time. otherwise, it is in setting mode.
TouchOut1 To
TouchOut2 To
Wake up by gesture
Power on Volume
Power on Volume Setting.
In Menory mode, when the screen powered on, volume will same
as the power off.
In Settings mode, every time the IFP turns on, volume is the value
of this setting.
Volume Settings
InputLabel
Select the input source you want to label.
Source
Label
Reset
Edit the label of the selected input source.
Reset labels to defaults.
TouchOut is there to define which touch signal output belong to
which input. E.g. If TouchOut1 is set to VGA1 it means the touch
signal output from TouchOut1 belongs to the input from VGA1.
When both ports are connected TouchOut2 has priority by default.
Select On to enable two or more fingers touch the bottom of
the screen and drag upward to turn on the IFP when the
IFP is in standby mode.
Lock Touch
Float Menu
Turn on/off the float menu display.
In order to lock the screen buttons.
Restore To Default
Reset all settings to factory defaults.
F.M Auto Off
Enable the float menu auto off if there is no activity for 15 secs or
not.
Lock Keypad
To disable the function of the touch panel.