Product Overview

Top of Page
APPLICATIONS:
Nokorode® Regular Paste Flux can be used with 95/5, 60/40, 50/50 and 40/60 solders. It can be
used on all solderable metals including copper, tin, zinc, nickel, and sheet lead. Do not use on
stainless steel, aluminum or magnesium. Not recommended for electronic use.
Top of Page
PACKAGING:
Code
Size
Qty. Per
Case
Lbs. per
Case
Cu. Ft Per
Case
14000
1.7 oz.
48 jars
8
0.35
14001
1.7 oz. (carded)
50 jars
12
14010
4 oz.
24 jars
8
0.25
14020
8 oz. "tool box"
24 jars
16
0.45
14030
1 lb.
12 jars
14
0.45
Top of Page
INSTRUCTIONS:
1. Remove all dirt from surfaces to be soldered.
2. Do not breathe vapors during soldering operations.
3. Apply a small amount of flux evenly to both joining surfaces. Heat and apply solder in normal
manner.
4. When joint has cooled, wipe outside and flush inside surfaces thoroughly with water.
5. Flux paste may liquefy if stored under very hot conditions (usually greater than 130 degree F).
Before using, cool slightly until flux re-solidifies.
For additional technical information, call Toll Free 1-800-231-3345.
Top of Page
PRECAUTIONS: