Installation Guide

Instructions
Step 1 Stir before using. Wipe threads clean.
Step 2 For pipe diameters up to 1¼", apply to male threads only. For larger sizes, apply to both male and female threads.
Step 3 Join and tighten pipe to ANSI Standards.
Step 4 Wipe excess sealant from joints. For natural gas and water lines up to 2" diameter and up to 100 psi, piping systems may
be placed into immediate service. For other service and applications conditions. Contact Technical Service for recommended cure
times.
For additional technical information, call toll free 1-800-231-3345.
Precautions
FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE EXPOSURE OR ACCIDENT,
CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300
WARNING - COMBUSTIBLE
Refer to Safety Data Sheet (SDS).
KEEP OUT OF REACH OF CHILDREN
.
Code Size Qty. per Case Lbs. per Case Cubic Feet
25790 1 ⁄ 0z. display (50 g) 24 Tubes 4 0.13
25793 1 ⁄ 0z. display (50 g) 12 Tubes 2 0.06
25631 ⁄ Pint Brush Top (118 ml) 24 cans 11 0.18
25633 ⁄ Pint Brush Top (118 ml) 12 Cans 6 0.14
25551 ⁄ Pint Brush Top (237 ml) 24 Cans 21 0.45
25431 Pint Brush Top (237 ml) 12 Cans 20 0.43
25300 Quart Brush Top (946 ml) 12 Cans 37 0.78
25271 Gallon Friction Top (3.8 L) 4 Cans 46 0.94
Packaging
Wt/Gal @ 77°F 10.8 ± 0.5 lbs/gal.
VOC 317 g/L
Flash Point SETA CC 150°F (65°C)
Color Yellow
Shelf Life 2 years
Specifications Approvals
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the
methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
Meets ANSI LC 7-2009 Working Temperature Range -40°F to 125°F. Maximum Working Pressure: 125 psi. For Use
With Natural Gas (VAPOR STATE ONLY). Use on Steel,Galvanized Steel, Iron, Brass, Copper and Aluminum. For
Pipe Size Up to And Including 1¼" inch.
Classified by Underwriters Laboratories Inc.® for use in devices handling gasoline, petroleum oils, natural
gas (pressure not over 100 psig), propane, or butane not exceeding 2 inch pipe size. 32R2
Manufactured by RectorSeal LLC  2601 Spenwick Drive, Houston, TX 77055, USA  800-231-3345  Fax [phone]  rectorseal.com
A CSW Industrials Company. RectorSeal, the logos and other trademarks are property of RectorSeal, LLC, its afliates or its licensor’s and are protected by copyright, trademark and other intellectual property laws,
and may not be used without permission. RectorSeal reserves the right to change specications without prior notice. ©2022 RectorSeal. All rights reserved. R50205-0422
LISTED
PIPE JOINT COMPOUND
MH12259
Certified to
NSF/ANSI/CAN 61
NSF pw-dwv-sw
Limited Warranty
For more information on our product limited warranty, visit RectorSeal.com