FAQ's

A Complete Solution & Protection System for Leaks

Sponsored by

Applying both RectorSeal products addresses the fundamental issue of corrosion from both inside

and outside the compressor. AC Leak Freeze Nano Pro is a high quality, non-polymer refrigerant

sealant that won’t react with moisture or air. It is the interior solution. GulfCoat stops the exterior

corrosion problems because it is moisture and corrosion resistant while providing UV protection.

It is the exterior solution.

GulfCoat and AC Leak Freeze Nano Pro will help reduce repeated calls to your customers. This

saves them time and expenses. Using these products, and informing your customers of their

benefits, illustrates your technical expertise, as well as demonstrates your concern for their HVACR

needs. They also establish you as a problem solver when you explain why the best corrosive

fighting products on the market will save them time and energy and add life to their HVACR units.

Cleaning coils is about heat transfer and energy. A dirty or corroded coil will reduce heat

transfer, resulting in more energy use and, ultimately, higher utility costs. Your customers will

notice. You’re oering extended protection. Just cleaning coils helps —momentarily— but a

protective coating keeps the coils cleaner when you’re not there. That’s why we wax floors for

longer-lasting protection. Applying GulfCoat to coils adds a long-lasting shield of protection.

Contractors struggle with one of the most common and troublesome AC problems: fixing leaks. This results

in repeated callbacks, loss of time and reduced profit margins. Callbacks also raise the question of your

expertise in the customer’s mind. RectorSeal’s dual corrosion-solving sealants solutions provide contractors

with the assurance that you use the highest quality product on every service call.

How does this twin protection

system (GulfCoat & AC Leak Freeze

Nano Pro) provide the kind of

corrosion safeguard I can count on?

How does the system provide a

“value added” service to

my customers?

FAQ

A COMPLETE SOLUTION & PROTECTION

SYSTEM FOR LEAKS

Why is a protective coating for coils

necessary? Can’t you just clean it?

PAGE 1
A Complete Solution & Protection System for Leaks 1 FAQ A COMPLETE SOLUTION & PROTECTION SYSTEM FOR LEAKS Contractors struggle with one of the most common and troublesome AC problems: fixing leaks. This results in repeated callbacks, loss of time and reduced profit margins. Callbacks also raise the question of your expertise in the customer’s mind. RectorSeal’s dual corrosion-solving sealants solutions provide contractors with the assurance that you use the highest quality product on every service call.
PAGE 2
A Complete Solution & Protection System for Leaks What are the benefits of using a spray system compared to a dipping approach? A dipping approach is adequate in the pre-installation phase but is impractical in the field, during the post-installation service phase. Dipping on-site is unworkable because of technical issues and time. A spraying system is portable and cost-efficient, and a contractor can do it “on the spot,” saving time and money for both the contractor and the customer.