MSDS

MATERIAL SAFETY DATA SHEET
MSDS 0621
=============================================================================
Section 1 -- PRODUCT AND COMPANY IDENTIFICATION
-----------------------------------------------------------------------------
HMIS CODES
PRODUCT NAME Health 2
RectorSeal Pipe Repair Kit Flammability 1
Reactivity 0
PRODUCT CODES PPI B
82112
CHEMICAL FAMILY
Organic/Inorganic
USE
Pipe Wrap
MANUFACTURER'S NAME EMERGENCY TELEPHONE NO.
The RectorSeal Corporation Chemtrec 24 Hours
2601 Spenwick Drive [phone]
Houston, Texas 77055 USA
DATE OF PREPARATION TECHNICAL SERVICE TELEPHONE NO.
January 5, 2005 [phone]
=============================================================================
Section 2 -- COMPOSITION/INFORMATION ON INGREDIENTS
-----------------------------------------------------------------------------
% by WT CAS No. INGREDIENT UNITS
34.4 9048-57-1 Polypropylene polyol diphenyl methane
di-isocyanate prepolymer
ACGIH TLV N/D ppm
OSHA PEL N/D ppm
7.4 101-68-8 Methylene bisphenyl isocyanate (MDI)
ACGIH TLV 0.005 ppm
OSHA PEL CL 0.02 ppm
trace Silicone
ACGIH TLV N/D
OSHA PEL N/D
4.7 Synthetic rubber
ACGIH TLV N/D
OSHA PEL N/D
4.7 Aluminum foil pouch
ACGIH TLV N/D
OSHA PEL N/D
46.4 Fiberglass knit fabric
ACGIH TLV N/D
OSHA PEL N/D
2.4 Polyethylene core
ACGIH TLV N/D
OSHA PEL N/D
=============================================================================
Section 3 -- HAZARDS IDENTIFICATION
-----------------------------------------------------------------------------
SUMMARY OF ACUTE HAZARDS
When water is added to product at temperatures greater than 122 F, part of
the resin may be liberated in the form of MDI fume. Do not exceed this
temperature
ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS
INHALATION
Avoid breathing dust from cutting cured product. A vacuum saw is
recommended.
EYE CONTACT
Page
1
of
4
8/2/2010
http://www.rectorseal.com/files/285/RectorSeal%20Pipe%20Repair%20Kit.html