Product Overview

2601 Spenwick Dr. - Houston, TX 77055
tel: [phone]
fax: [phone]
www.rectorseal.com - Find Us on Facebook
P-F-11 Copyright ©2011 RectorSeal
HubSett
™
Test Couplings Installation
Options for ABS & PVC Pipes
Typical Installation 1
3” Sewer line at building & 3” Side sewer.
Note: No Fernco
®
connector required.
3” ABS or PVC 3” ABS or PVC
Riser
Clean Out Final Grade
3” Hubsett™
3” 2-Way SewerTest Area
Typical Installation 2
When municipality requires 2 clean outs - 4” to 4”
Note: 1) No Fernco
®
connector required.
2) Test on the building and side sewer can be com-
pleted separately.
4” ABS or PVC 4” ABS or PVC
2 Risers
Clean Out Final Grade
4” Hubsett™ SewerTest Area
Typical Installation 3
When municipality requires 2 clean outs -
3” to SDR 35
Note: 1) No Fernco
®
connector required.
2) Test on the building and side sewer can be
completed separately.
3” ABS 4” SDR 35
2 Risers
Clean Out Final Grade
3” Hubsett™ SewerTest Area
Typical Installation 4
This method is utilized when the side sewer
contractor seires to hook-up after the building is
under test. 1 ½” riser pipe is utilized to ll side
sewer for test.
3” ABS 3” ABS
Clean Out Final Grade
3” Hubsett™
3” 2-Way C.O. SewerTest Area
1” ABS3” ABS
3” x 1” Santee
Typical Installation 5
This method allows for testing of the side sewer
and the building at the same time.
3” ABS
4” SDR 35
Riser
Clean Out Final Grade
3” Hubsett™
Sewer
Test Area
The HubSett
™
test coupling is a uniquely designed cou-
pling and test device all in one. It replaces other test
methods and allows the buildings drain waste and vent
system to be connected to the sewer line prior to the
initial test.
Once the HubSett
™
test coupling has been properly
installed and inspected, the entire system may be cov-
ered, allowing the builder to complete all groundwork
from sidewalk to landscaping.
Upon passing inspection, the HubSett
™
test dome is
easily removed with one quick pull on the release cord,
allowing water to ow into the sewer. The HubSett
™
test
coupling now functions as any other coupling, and does
not need to be removed.
97050 3 in. ABS 97051 3 in. PVC
97052 4 in. ABS 97053 4 in. PVC
97063 4 in. PVC Hub x Spigot