Submittal Sheet

Table Of Contents

MIGHTY PUMP™

A/C CONDENSATE PUMP

DESCRIPTION:

Mighty Pump™ gives contractors an easy way to remove blockages from A/C condensate drain lines, without the need for

electricity, nitrogen tanks or expensive gas cartridges. Made of heavy-duty molded PVC, this lightweight, re-useable pump

generates enough pressure to quickly clean slime, mold and dirt plugs from primary and secondary condensate drain lines. It’s

a reversible, hand-operated pump that can be used to vacuum or push-out a clogged drain line.

CHARACTERISTICS:

• Quickly & completely clears slime blockage in seconds

• Clears blocked A/C condensate drain lines without nitrogen

• Clean out A/C condensate drain lines

• Can be used to drain standing water from A/C condensate & overflow pans

• Can be used to remove standing water from water heater overflow pans

APPLICATIONS:

Any type of Air Conditioning condensate drain line.

PACKAGING:

Code Size Qty./Case Lbs./Case Cu. Ft./Case

97795 1 pump 4 xx xx

INSTRUCTIONS

READ ALL DIRECTIONS AND WARNINGS ON LABEL BEFORE USING

The pumps primary use is for clearing condensate drain lines, but it is also useful for moving water in other applications

such as:

• Draining a condensate overflow pan

• Draining a water heater overflow pan

• Draining a tub

1. To vacuum a condensate drain line

Connect the vacuum end of the Mighty Pump™, using the enclosed coupling, to the discharge end of the condensate

drain line or item needing draining. Note the direction of the FLOW arrow on the bottom of the pump body

. Place

the discharge hose end in a bucket or drain for collection and disposal of the waste water.

Figure 2: Pump arrangement using the vacuum side.

PAGE 1
MIGHTY PUMP™ A/C CONDENSATE PUMP DESCRIPTION: Mighty Pump™ gives contractors an easy way to remove blockages from A/C condensate drain lines, without the need for electricity, nitrogen tanks or expensive gas cartridges. Made of heavy-duty molded PVC, this lightweight, re-useable pump generates enough pressure to quickly clean slime, mold and dirt plugs from primary and secondary condensate drain lines. It’s a reversible, hand-operated pump that can be used to vacuum or push-out a clogged drain line.
PAGE 2
MIGHTY PUMP™ 2. push-out a condensate drain line Connect the pressure end of the Mighty Pump™, using the enclosed coupling, to the upstream end of the condensate line or item to be blown out. Note the direction of the FLOW arrow on the bottom of the pump body. Secure over ¾” pipe with supplied clamp. Figure 3: Pump arrangement using the discharge side. 3. Maintenance: 1. Clean unit after use by pumping clean water through unit until clean water is seen on the discharge side.