SS610 Brochure

INTRODUCING THE NEW
ElEctronic condEnsatE
ovErflow switch
For Installation Directly on
Primary Drain Pan or Clipped to
Coils Above Primary Drain Pan
ElEctronic condEnsatE
ovErflow switch
For Installation Directly on
Primary Drain Pan or Clipped to
Coils Above Primary Drain Pan
SS 610 ESS 610 E
The new SS610E is specially designed for
use in Mini Split systems. Its small Sensor can
easily t in the conned internal spaces of most
units. It can also be installed directly in the Drain
Pan or clipped to the unit’s Coils. SS610E’s CPU
unit is housed in an attractive casing that can
be mounted directly to the side of the unit.
The SS 610 E’s logic circuit continuously
samples the probes for water and will shutdown
the system if water is detected. Onboard LED’s
indicate the condition of the unit at a glance,
removing any guess work. The SS610 E will
automatically reset once the water subsides,
allowing the A/C to resume normal operation.
Easy to Use Sensor
Connects to Indoor Units
STATE-OF-THE-ART
Microelectronics
Attaches to Pan or Coils
with Unique Brackets
Multi-Voltage Switch
(0-250V AC, 5A
0-100V DC, 5A)
Can be wired in both
Normally Open & Normally
Closed Systems
No Moving Parts
Code Compliant
– Tested to UL-508
Onboard LED Indicator
H-E-12
Product Code 97622
Patent Pending
Designed
for Ductless
Mini Splits
CPU Unit
©2012 RectorSeal
®
508
IND.CONT.EQ
25XE
5A 250V AC
5A 30V DC
Scan for More
Wiring Information
Uses power from A/C Unit so
no bAtteries Are reqUired