Vanity Sink Assembly Instructions
Vanity Sink Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
Q Quantity of 2 Quantity 2 of 1 Top Panel 3 Quantity of 1 Quantity of 1 Quantity of 1 Quantity of 1 Door Panel 6 Quantity of 1 8 Quantity of 1 10 Quantity of 1 Back Lower Bar Quantity of 2 Cross Bar 13 Quantity of 1 Front Lower Bar Back Upper Bar 11 4 Middle Divide Panel Front Upper Bar 9 of 1 Right Side Panel Bottom Panel 7 Quantity Back splash Left Side Panel 5 Quantity of 6 Bolt （Ø1/4”*1/2”） Metal Plate 1 R 12 Quantity of 1 Back panel Quantity of 1 14 Leg Quantity
Quantity of 1 15 Wood Stopper 18 of 3 Left Drawer Side Quantity of 3 Right Drawer Side Quantity of 3 19 Quantity of 3 Drawer Front Quantity 17 16 Drawer Back Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required: No.
Vanity Sink Assembly Instructions Note: Align cam bolts by hand before using screwdriver. Insert Cam Locks (C) into corresponding holes on Front Upper Bar (7). Do not overtighten cam bolts. Stop when they feel secure. Insert Cam Bolts (A) into corresponding holes on Middle Divide Panel (6). Attach Front Upper Bar (7) to Middle Divide Panel (6) by inserting Cam Bolts (A) into corresponding holes until Front Upper Bar (7) and Middle Divide Panel (6) meet.
3 A C 9 C A B B 7 A B C B 4 Insert Cam Bolts (A) and Wood Dowels (B) into corresponding holes on Left Side Panel (3) and Right Side Panel (4). C 10 Insert Cam Locks (C) into corresponding holes on Front Upper Bar (7), Front Lower Bar (8), Back Upper Bar (9), and Back Lower Bar (10).
Attach Legs (14) to Bottom Panel (5) with Bolts (E) and Washers (F/G). 14 Tighten Bolts (E) with Phillips screwdriver (not included). 14 14 14 Figure 5 Attach Back Panel (12) to pre-assembled unit from Figure 5 with Screws (O). O O 12 O Figure 6 O Tighten Screws (O) with Phillips screwdriver (not included).
Attach the Knobs (H) to the Front Upper Bar using Bolts (I). Tighten Bolts (I) with Phillips screwdriver (not included). Figure 7 Attach the Hinges (L) to the Doors (13) using Screws (M). Tighten Screws (M) with Phillips screwdriver (not included).
Attach the Door Panel (13) to the assembled unit using Screws (M). To achieve uniform clearance around the door, you may need to adjust the door by tightening or loosening the two screws on the hinge. Tighten Screws (M) with Phillips screwdriver (not included). Attach the Knob (H) to the door using Bolt (I). Tighten Bolt (I) with Phillips screwdriver (not included). Figure 9 Note: Complete this step for all drawers.
Insert the assembled drawers from Figure 10 into the assembled body. Figure 11 Loosen the drawer slides as neede d to adjust the drawer height.
Attach the Top Panel (1) to the assembled unit. Figure 13 Attach Back Splash (2) to Top Panel (1). Q R Q Q Figure 14 G F R G F R Insert Bolts (R) with Washers (F/G) through holes on Metal Plate (Q) and the assembled unit.、 Attach Metal Plate (Q) to Back Splash (2) and assembled unit and tighten Bolts (R) with Phillips screwdriver (not included).
Note: If the table is not level, you can modify the height by turning the attached levelers by hand. Figure 15 Now your Vanity Sink is ready for use. Note: Install not included piping items: faucet, drain, and supply lines to vanity sink according to the instructions supplied with those items. Installation of faucet, drain, and supply lines by a certified plumber is recommended.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Please immediately examine this product carefully.
