Owner Manual

MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric
shock to persons or damage.
Light Bulb Replacement
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of
the log exterior disappears. There are two bulbs under the log set for IN2400 and IN2600. Four bulbs for
IN3000.
WARNING
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid burning of skin.
Except the light bulb replacement, any other servicing should be performed by an authorized service
representative.
I. Bulb Requirements
Light bulbs are 40 Watt, 120 volts Candelabra with an E-12 small socket base.
CAUTION
Do not exceed 40 watts per bulb
II. Operation
1. Open the light bulb area:
The light bulb area is at the back of electric fireplace, see “E”. There are 6 screws on it. Loosen
the screw and then you can open it.
2. Examine the bulbs to determine which bulbs require replacement.
3. Remove old bulb and replace a new one. Hold the socket while unscrewing or screwing bulbs.
4. Replace the cover of light bulbs.
5. Done.