Installation & Assembly_Table

Step 2
Position the bottom of the Table top(1) as shown.
And then insert the Legs(2) into the mounting position of Table Top(1).
Attach the Legs(2) by using M6 Screw(A) + Spring Washer(B)+ Flat Washer (C), onto
metal plate of Legs(2), tinghtening with Allen Key(E).
Step 1
Hardware Used
A：M6 Screw
B：Spring Washer
C：Flat Washer(M6 *16MM)
Make sure all parts are connected and securely locked into position.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Page 3 OF 4