Assembly & Installaion Instructions

PAGE 1
ASSEMBLY. AND INSTALLATION INSTRUCTIONS an .. TO AVOID RISK OF ELECTRICAL SHOCK: BE SURE TO'SHUT OFF. ¢ WARNING: : : so POWER WHILE INSTALLING OR SERVICING THIS FIXTURE, NOTE: Before installing; consult focal electrical cods for wiring and grounding requirements. © * FOR CHANDELIER-1: 1. Thread the fixture loop: onto the pe 2. Assemble the nipple(A) onto the cross: bar; and lock it in'place by hex nut; 1 3. Attach the cross brat resews upwards, 4.
PAGE 2
ASSEMBLY AND INST. ELATION INSTRUCTIONS { WARNING: TO AVOID RISK.OF ELECTRICAL SHOCK, BE SUREFOOTED OFF. POWER WHILE INSTALLING OR SERVICING THIS FIXTURE, NOTE; Before installing, consult local electrical codes foi wiring and grounding requirement. ‘* FOR CHANDELIER-2: 1. Thread the tubes(A) onto the nipple piece by “piece, then thread swivel into top of the tube tightly. ‘2. Thread 2 mounting screws properly into the 2 relevant mounting holes per-drifled on the cross bar.