Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align legs (#2) to the holes of the table top (#1), then secure with bolts (#A).
Prepare 2 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#A). Insert a dowel (#G) to the middle hole of the chairback (#1). Align cushion (#2) to the chairback (#1), then secure two middle holes of the cushion (#2) with bolts (#A), but do not fully tighten. Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#C). Secure corner holes of the cushion (#2) with bolts (#C) and tighten all bolts.
1) Prepare 4 bolts assembly by inserting lock washer (#D), then flat washer (#E) onto bolts (#B). Align front legs (#3R/L) to the holes of the cushion (#2). Secure with bolts (#B), but do not fully tighten. 2) Align side stretchers (#4R/L) to the side of the chair. Align front stretcher (#5) to the front of the chair. Secure stretchers with screws (#H). Tighten bolts of front legs.
