Assembly Instructions

ManualsBrandsRed Barrel Studio ManualsFurnitureKinch Kitchen Cart with Stainless Steel Top

Hardware List

Part List

Tool(s) required for assembly: Phillips screwdriver

Kitchen Cart

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Small Hex Wrench

1 pc.

Hex Wrench

1 pc.

M6x35

Head Cap Bolt

14 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

32 pcs. (+1 extra)

M3.5x13

Wood Screw (short)

24 pcs. (+1 extra)

M4x16

Wood Screw

22 pcs. (+1 extra)

Wood Plug

10 pcs. (+2 extra)

Adjustable Pin

8 pcs. (+1 extra)

M4x25

Machine Screw

12 pcs.

Refer to later page(s) of these

instructions for drawer assembly.

Drawer

1 pc.

Drawer

3 pcs.

Pipe

3 pcs.

Base Rack

1 pc.

Door

1 pc.

Door

1 pc.

Gate Leg

1 pc.

Side Rack

1 pc.

Side Rack

1 pc.

Round Arm

1 pc.

Handle Arm

2 pcs.

Shelf

2 pcs.

Base

1 pc.

Back Piece

2 pcs.

Front Rail

3 pcs.

Back Stretcher

1 pc.

Front Stretcher

1 pc.

Back Panel

3 pcs.

Middle Panel

1 pc.

Middle Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Top

1 pc.

Cam Lock

4 pcs. (+2 extra)

Cam Lock Screw

4 pcs. (+1 extra)

Pull Handle

6 pcs.

Caster

2 Locking

2 Non-Locking

4 pcs.

Summary of content (8 pages)

PAGE 1
Kitchen Cart IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. I. Front Stretcher 1 pc. H. Back Stretcher 1 pc. B. C. D. E. Side Panel Side Panel Middle Panel Middle Panel F. 1 pc. 1 pc. 1 pc. 1 pc. Back Panel 3 pcs. G. Back Piece 2 pcs. J.
PAGE 2
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. STEP 1 Cam Lock Screw Insert Cam Lock Screws into pre-drilled holes of Top (A).
PAGE 3
Assembly Instructions 3/7 STEP 4 B Attach unit to Base (K). Attach Side Panel (B) to unit with Head Cap Bolts. (See Figure 3) K Figure 3 Head Cap Bolt H STEP 5 F Slide Back Panels (F) into place. Attach Back Stretcher (H) and Front Stretcher (I) to unit with Head Cap Bolts. I F Head Cap Bolt F Attach Side Panel (C) to unit with Head Cap Bolts. C S STEP 6 U T U U R Attach Side Rack (R) to unit with Head Cap Bolt. Slide Base Rack (T) and Pipes (U) into Side Rack (R).
PAGE 4
Assembly Instructions 4/7 Head Cap Bolt STEP 7 Attach Handle Arms (M) to Side Panel (C) with Head Cap Bolts. Slide Round Arm (N) into place. M Attach Gate Leg (Q) to back of unit with Wood Screws into pre-drilled holes. (See Figure 4) M N Q C Figure 4 Wood Screw STEP 8 Insert Adjustable Pins into side panels and middle panels at desired level. O P L L Adjustable Pin Place Shelves (L) into position. Attach Doors (O) and (P) by sliding door lift hinges into side panel lift hinges.
PAGE 5
Assembly Instructions 5/7 Drawer (V) Bottom V3 V1 STEP 9 V4 V2 Wood Screw (long) Roller at back Attach Drawer Front (V1) and Drawer Back (V2) to Drawer Side (V3) with Wood Screws (long). Attach Drawer Side (V4) to unit with Wood Screws (long). STEP 10 Wood Screw (short) Slide Drawer Bottom (V5) into the grooves of Drawer Sides (V3) and (V4) until it meets Drawer Front (V1). V3 V5 Attach Drawer Bottom (V5) to unit with Wood Screws (short).
PAGE 6
Assembly Instructions 6/7 Drawer (W) Bottom W1 STEP 12 W4 W3 W2 Attach Drawer Front (W1) and Drawer Back (W2) to Drawer Side (W3) with Wood Screws (long). Wood Screw (long) Roller at back STEP 13 Slide Drawer Bottom (W5) into the grooves of Drawer Sides (W3) and (W4) until it meets Drawer Front (W1). Attach Drawer Side (W4) to unit with Wood Screws (long). Wood Screw (short) W1 W3 Attach Drawer Bottom (W5) to unit with Wood Screws (short).
PAGE 7
Assembly Instructions 7/7 Cam Lock A STEP 15 Attach Top (A) to unit with Cam Locks. (See Figure 7) Slide Drawers (V) and (W) into position. V V V W Figure 7 STEP 16 Cover all holes with Wood Plugs.
PAGE 8
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.