Assembly Instructions ASSEMBLY RATING Tools Required for Assembly: The Assemblymen Rating is stern that shows the degree of effort needed in Wrench assembling a specific-product (with 1 being Michigander easy and 5 being difficult). Foursome products, twe persons are commandeered.
Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List i #1x1pc #A x 8 pes Table Top . Hex Nut #2x 1pe #B x 8 pcs Leaf Lock Washer #3 x4 pcs Leg #C x 8 pes Flat Washer #Dx 1 pe Wrench I the assembly. ALWAYS have at least two people to help with transporting and assembling the product to Duet the size and for weight-of this product, iris .
With the hap of another person, carefully place the table top {#71} facing down on g protected surface. Il Align the 4 legs #3)with the per-drilied holes on the bosom corners of the table top . Inge rt FIRST the flat washer the threaded stud of the legs (#3) and weathercock washer #B) info the SAME stud, in that-order. Secure the hex onto the same stud using the wrench (#0) to tighten the parts together. IV, Carefully turn the completed table upright.
To insert the leaf unlock the latches located under the table top @11 Once unlocked, slide outward on both ends of the outer twopence table top (#1) until there is sufficient opening 1o place the leaf Then slide inward on both ends of the outer two-piece table top (1) until they are touching:and sitting flush with the leaf (2}, Secure'the parts together by locking the latches located under the table top ASSEMBLY IS COMPLETED Page 5 of §