Assembly Instructions

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack and lay out the parts
as shown in illustration.
2. Screw tube (B) to base (A), screw tube (C ) to
Tube (B), screw tube (D) to tube (C ),
Screw socket Section (E) to tube (D),pull cord from base.
3. Screw Stem (F) to Socket Section (E).
4. Put shade on Stem (F), make the shade keep horizontal
before tightening it by Finial (G).
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)
AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use Type A bulb 2 x 60W
(Maximum)
(Bulb not included)