3-PC COUNTER HEIGHT BAR SET Model No: NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
NOTES: * Ensure all parts and components are present before beginning assembly. * Assemble on a soft, smooth surface to prevent damage to product finish. * Assembly and handling may require two people. * Estimated assembly time is 45 - 60 minutes. * Read all instructions completely before assembly. * DO NOT use power tools. * CAUTION: Adult assembly required. * Phillips head screw driver is not included. CARE AND CLEANING Dust this item regularly with a soft, lint-free cloth to prevent soil build up.
-PC COUNTER HEIGHT BAR SET HARDWARE LIST 1 2 3 HARDWARE LIST 3 2 1 4 Ø1/4" X 1-9/16" Ø1/4" X 1-3/8" BOLT BOLT BOLT × 1224 " φ14" PCS × 1169 " 5 BOLT 6 BOLT 24 PCS 2 PCS × 138" 8 PCS BOLT 8 PCS 5 6 - + - 4 φ14" 2 PCS + φ14" Ø1/4" X 1/2" × 58 φ163 " Ø3/16" X 5/8" φ18" Ø1/8" × 58" X 5/8" WOOD SCREW PHILLIPS HEAD SCREW WOOD SCREW PHILIPS HEAD SCREW 8 PCS 4 PCS 4 PCS 8 PCS 8 7 7 8 9 ROD CAM BOLT 42 PCS 42 PCS HOOK 2 PCS CAM LOCK NUT 42 PCS 42 PCS 9 HOOK ALLEN KEY
3-PC COUNTER HEIGHT BAR SET PARTS LIST A B BACK FRAME 2 PCS D C RIGHT CHAIR LEG 2 PCS E STRETCHER 2 PCS G LEFT CHAIR LEG 2 PCS F CHAIR FRONT RAIL 2 PCS H SEAT CUSHION 2 PCS I 900 x 255 x 15MM TABLE RAIL 2 PCS J TABLE SIDE PANEL 1 PC K RIGHT SIDE PANEL 1 PC L 900 x 255 x 15MM 446 x 50 x 15MM 446 x 100 x 15MM LEFT SIDE PANEL 1 PC TOP RAIL 2 PCS BOTTOM RAIL 1 PC M N O 900 x 445 x 15MM 445 x 225 x 15MM 925 x 495 x 15MM BACK PANEL 1 PC BOTTOM PANEL 3 PCS TABLE TOP 1 PC
3-PC COUNTER HEIGHT BAR SET B 1 1 9 9 A C A 1 1 1 1 1 1 1 1 1 1 A B B C C 1 STEP 1 Attach the right and left chair legs (B & C) to the back frame (A) with bolts (1). Use Allen Key (9) to install the bolts. NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the following steps.
3-PC COUNTER HEIGHT BAR SET B C 3 3 3 3 D 3 3 3 3 9 D FRONT 3 STEP 2 Attach stretcher (D) to the right and left chair legs (B & C) with bolts (3). Use Allen Key (9) to install the bolts. NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the following steps.
3-PC COUNTER HEIGHT BAR SET E 1 1 11 E FRONT 9 B C 1 STEP 3 Attach the chair front rail (E) to the chair legs (B & C) with bolts (1). Ensure that the chair front rail (E) goes smoothly into the two chair legs before tightening bolts (1). Tighten all bolts previously installed.
3-PC COUNTER HEIGHT BAR SET 4 4 4 4 4 4 4 4 F F 4 STEP 4 Attach the seat cushion (F) to the chair with wood screws (4) using a Phillips head screw driver (not included). Repeat steps 1- 4 to assemble the other chair.
3-PC COUNTER HEIGHT BAR SET - + + I - L + + + - + K J - + + + - - + - + - + + - + + N + - - + - + - + + + - + + - + - + - - - M 6 STEP 5 Insert cam locks (6) into the holes of right side panel (I), top rails (K), bottom rail (L), back panel (M) and bottom panels (N). A Phillips head screwdriver can be used to rotate the cam locks (6) to align with cam bolts (7) in the following steps.
1 K 7 7 3-PC COUNTER HEIGHT BAR SET + + - - + + - + - + + + 6 6 - + + - + + - - - + + + + 21 - N N 7 7 L K 7 7 + - 6 - + + - + - - + - + + - - + + - + - - + + + 7 + + 17 - + + K 6 - - L + 77 K 7 6 + - - + + - - + + N + - - 7 7 + - - + + + - + + STEP 6 Insert cam bolts (7) into the holes of bottom rail (L). Attach bottom rail (L) to bottom panel (N).
3-PC COUNTER HEIGHT BAR SET 2 1 1 K L K 7 - + - + - N N N + - + M 7 + - + - + - + - + 6 7 7 STEP 7 Insert the cam bolts (7) into the holes of the back panel (M). Attach bottom panles (N) to the back panel (M) as shown above. Use a Phillips head screw driver (not included) to rotate the cam locks (6) to secure cam bolts (7).
3-PC COUNTER HEIGHT BAR SET I - + 7 - + - - + + 7 + - + 6 - + - - + - + + + J 7 7 STEP 8 Insert the cam bolts (7) into the holes of the right and left side panels (I & J). Attach the side panels (I & J) to the assembled unti as shown. Use a Phillips head screw driver (not included) to rotate the cam locks (6) to secure cam bolts (7).
3-PC COUNTER HEIGHT BAR SET 1 G 1 H 1 1 1 1 1 G A 1 1 1 9 STEP 9 Attach the table rails (G) to the table side panel (H) and the assembled unit using bolts (1) as shown. Use Allen Key (9) to tighten bolts. NOTE: Do not tighten the bolts in this step. Leaving the bolts loose will facilitate assembly in the following steps.
3-PC COUNTER HEIGHT BAR SET 7 7 O O O 2 7 2 + 9 H 7 + 7 - 2 6 7 STEP 10 Insert the cam bolts (7) into the holes of the table top (O). Attach the table top (O) to the assembled unit with bolts (2). Use Allen Key (9) to tighten bolts (2) and use a Phillips head screw driver (not included) to tighten the cam bolts (7). Tighten all bolts previously installed.
3-PC COUNTER HEIGHT BAR SET 5 8 J 8 5 STEP 11 Attach the hooks (8) to the left side panel (J) with Phillips head screws (5) using a Phillips head screw driver (not included). NOTE: The screws (5) will make their own holes so that you can place hooks (8) in the desired location.
3-PC COUNTER HEIGHT BAR SET CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Product Maximum Weight50 lbs Table Top 10 lbs per shelf That's it ! You've finished assembling your counter height bar set.
BA B E C B D Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
