Installation & Assembly

Assembly Instructions
IMPORTANT
You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Front Stretcher (B) and
Back
with
Stretcher (C) to Side Frame (D)
Head Cap Bolts, Spring Washers
and Flat Washers. (See figure 1)
C
STEP 2
STEP 3
A
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
Wood Screw
(long)
Wood Screw
(short)
Attach Shelf (F) to unit with
Attach Side Frame (E) to unit
with
Head Cap Bolts, Spring Washers
and Flat Washers.
Head Cap Bolts,
Spring Washers and Flat Washers.
D
B
E
F
Remove all drawers, then place Cabinet (A)
upside down on a soft cloth.
Attach unit onto Cabinet (A) with
3X Wood Screws (short) for Front Stretcher
and 3X Wood Screws (long) for Back Stretcher.
Turn the unit to its’ upright position
Slide all drawers into position.
Figure 1