Assembly Instruction

Stretch Fabric Recliner Slipcover

1. Locate

placement labels on

each of the 4 recliner slipcover parts.

Please note the pocket on the left arm

slipcover part. The right arm has a

place for the chair handle.

2. Recline

chair so the footrest is raised

for all steps. Place arm covers over each arm,

pulling down toward the bottom tucking as

you go. Stretch under bottom to hold securely.

3. Place

center cover over the chair back

stretching it evenly as you pull it down. Tuck

front portion securely where the chair meets

back of seat.

4. Pull

the back of cover downward.

Stretch under bottom and use the elastic

loops to hold securely.

5. Place

the footrest cover over the footrest

and pull toward the back of the chair, tucking

excess material between arms and back.

Enjoy

your new look as the stretch fabric

hugs your furniture and keeps it in place!

Instructions for Recliner

PAGE 1
Stretch Fabric Recliner Slipcover Instructions for Recliner 1. Locate placement labels on each of the 4 recliner slipcover parts. Please note the pocket on the left arm slipcover part. The right arm has a place for the chair handle. 2. Recline chair so the footrest is raised for all steps. Place arm covers over each arm, pulling down toward the bottom tucking as you go. Stretch under bottom to hold securely. 3. Place center cover over the chair back stretching it evenly as you pull it down.