Owner Manual

2, 3, or 4-LIGHT VANITY BAR

1. OUTLET BOX (not included)

2. MOUNTING PLATE

3. OUTLET BOX SCREWS and WASHERS

(pre-attached to outlet box)

4. BLACK SUPPLY WIRE (not included)

5. SMOOTH (or BLACK) FIXTURE LEAD WIRE

6. WHITE SUPPLY WIRE (not included)

7. RIBBED (or WHITE) FIXTURE LEAD WIRE

8. SUPPLY GROUND WIRE (not included)

9. FIXTURE GROUND WIRE

10. WIRE CONNECTORS

11. ANCHOR SCREWS

12 FIXTURE SCREWS and HEX NUTS

13. ANCHORS

14. GROUND SCREW (pre-attached)

15. GLASS SHADES

16. FIXTURE

17. DECORATIVE NUTS (pre-attached)

18. SOCKET RING

PLEASE READ AND SAVE FOR FUTURE REFERENCE.

CAUTION

1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.

2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If

you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

GENERAL

Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations

provided.

Bulbs Required (not included): 2 Medium Base 100 Watt Max. (for 2-light Vanity Bar)

3 Medium Base 100 Watt Max. (for 3-light Vanity Bar)

4 Medium Base 100 Watt Max. (for 4-light Vanity Bar)

PAGE 1
PLEASE READ AND SAVE FOR FUTURE REFERENCE. CAUTION 1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock. 2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
PAGE 2
Lighting Limited Warranty We warrant all our Products to be free from defects in material and workmanship, subject to certain conditions and exclusions, for period of one year from the date the Product was shipped to the original end use purchaser. We will warranty our product only if it is sold through an our authorized dealer.