Installation & Assembly

1. Attach the short threaded pipe to the mounting strap, then secure it
with a big washer and big hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the top loop to the short threaded pipe.
4. Secure the loop onto the stem of the fixture, thread fixture
wires through threaded end of loop first.
5. Connect the chain:
- Determine length of chain needed to achieve desired fixture
height. (To remove excess chain section, use pliers
to bend link open.)
- Weave the fixture wires and fixture grounding wire through
the chain, collar and canopy.
6. Connect one end of the chain to the loop using a loop lock.
7. Connect the other end of the chain to top loop by using the
other loop lock.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Finial(P)
Decorative Cup(Q)
Rubber Pad(V)
Metal Pad(U)
Small Hex Nut(N)
Long Threaded Pipe(M)
Rod(T)
Small Cap(R)
Big Cap(S)
Small Washer(O)
Small Hex Nut(N)
Small Hex Nut(N)
Small Washer(O)
Coupling
Fixture
Holder
Stem
Arm
Glass Shade
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Socket
Turn off the power at fuse or circuit box.
Installation Steps
Loop Lock(K)
Loop Lock(K)
Outlet Box
House Grounding Wire
Wire Nut(E)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Short Threaded Pipe(F)
Canopy(G)
Big Hex Nut(D)
Big Washer(J)
Collar(I)
Chain(L)
Loop
Bulb Type A Max.100W
(not included)
Top Loop(H)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Big Hex Nut (D)
Small Hex Nut (N)
Wire Nut (E)
Canopy (G)
Top Loop (H)
Collar (I)
Short Threaded Pipe (F)
Long Threaded Pipe (M)
Big Washer (J)
Small Washer (O)
Finial (P)
Decorative Cup (Q)
Loop Lock (K)
Chain (L)
Small Cap (R)
Big Cap (S)
Rod (T)
Rubber Pad (V)
Metal Pad (U)