Installation & Assembly

1. Thread the long screws through mounting strap, then secure them
with two lock nuts. Adjust the length of long screws if necessary.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
4. Attach the fixture to the mounting strap, and secure it with two ball nuts.
5. Attach threaded pipe to the coupling of the socket, and secure it with a washer and hex nut.
6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
7. Slip the rod, small cap with the open side facing upward and big cap with the open side facing downward up through
threaded pipe, secure them with a washer and hex nut.
Ball Nut (G)
Fixture
Bulb Type A Max.100W
(not included)
Hex Nut (I)
Washer (J)
Threaded Pipe (K)
Big Cap (P)
Rod (O)
Hardware Package (included):
Socket
Coupling
Hex Nut(I)
Washer(J)
Threaded Pipe(K)
Arm
Glass Shade
Hex Nut (I)
Decorative Cup (N)
Finial (H)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (F)
Lock Nut (E)
Mounting Strap (A)
Long Screw (D)
Ball Nut (G)
Rubber Pad (L)
Metal Pad (M)
Decorative Cup (N)
Finial (H)
Big Cap(P)
Small Cap(Q)
Washer(J)
Hex Nut(I)
Rod(O)
Metal Pad (M)
Rubber Pad (L)
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
Installation Steps
Outlet Box
House Grounding Wire
Wire Nut (F)
Long Screw (D)
Mounting Strap (A)
Lock Nut (E)
Green Grounding Screw (C)
Mounting Screw (B)
Small Cap (Q)