Installation & Assembly
C
D
C
D
A
B
E
F
G
2、Locate the power cord C
attached to the bottom back and
connect to plug D located at the
rear of seat.
Assembly Instructions
A
B
C
D
P
1、Slide the metal receiver over the
metal post.Press both sides of back
firmly downward until locked in place.
P
4、Locate the transfomer P and
connect to DC Port located at the rear
of arm.
Male
Female
Note: Make sure all
PLUGS are connected on
the product before
plugging power cord
into power outlet. If
not damage can occur.
5、Apply The Wings
Insert the male Bracket into the slot of
the female Bracket pressing firmly
downward until the frame is tight.
E
F
3、Locate the light cord E
attached to the bottom back
and connect to plug F
located at the rear of seat.