Installation & Assembly

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

1. Thread two fixture mounting screws (B) through the mounting plate (A), then secure with two lock nuts (E).

Adjust the length of the fixture mounting screws (D) if necessary .

2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B).

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Hardware Package (included):

Turn off the power at fuse or circuit box.

Installation Steps

Mounting Screw (B)

Mounting Plate (A)

Green Ground Screw

House Ground Wire

Fixture Ground Wire

Outlet Box

Fixture Ground Screw (D)

Lock Nut (E)

Wire Connector (C)

Fixture Wire

Back Plate

Ball Nut (F)

Support Rod (G)

Glass Shade

Fixture

Bulb Type A Max.100W

(not included)

Mounting Plate (A) Fixture Mounting Screw (D)Wire

Connector

(C)

Lock Nut (E)

Ball Nut (F) Support Rod (G)

Mounting Screw (B)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follow: ---Connect the hot wire (black insulation) from the fixture to the black wire from the power source. ---Connect the neutral wire (white insulation) from the fixture to the white wire from the power source. ---Attach the fixture ground wire (green insulation or bare wire) to the mounting plate (A) with the green ground screw, then connect it to the house ground wire with the wire connector (C).