Installation & Assembly

ManualsBrandsRed Barrel Studio ManualsFurnitureSavorey 32.5'' Solid Wood Kitchen Cart and Locking Wheels

Hardware List

Part List

Tool(s) required for assembly: Phillips screwdriver

Cuisine Cart

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

M6x35

Head Cap Bolt (long)

12 pcs. (+1 extra)

M6x30

Head Cap Bolt (middle)

for Top

4 pcs. (+1 extra)

M6x25

Head Cap Bolt

for Side Tower Bar

2 pcs. (+1 extra)

M4x16

Wood Screw

for Caster

16 pcs. (+1 extra)

Adjustable Pin

4 pcs. (+1 extra)

Knob

2 pcs.

M4x20

Machine Screw

4 pcs.

Wood Plug

8 pcs. (+1 extra)

Refer to later page(s) of these

instructions for drawer assembly.

Drawer

1 pc.

Front Rail

1 pc.

Back Stretcher

1 pc.

Shelf

1 pc.

Back Upright

1 pc.

Back Panel

2 pcs.

Base

1 pc.

Brush Chrome Pipe

3 pcs.

Base Rack

1 pc.

Side Tower Bar

1 pc.

Side Rack

1 pc.

Side Rack

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

M3.5x13

Wood Screw (short)

6 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

8 pcs. (+1 extra)

Pull Handle

1 pc.

Caster

2 Locking

2 Non-Locking

4 pcs.

Door

1 pc.

Door

1 pc.

Summary of content (6 pages)

PAGE 1
Cuisine Cart IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List F. Back Stretcher 1 pc. C. Base 1 pc. A. B. Side Panel Side Panel 1 pc. 1 pc. D. Back Upright 1 pc. J. Brush Chrome Pipe 3 pcs. E. Back Panel 2 pcs. M. Shelf 1 pc. G. Front Rail 1 pc. K.
PAGE 2
Assembly Instructions 2/5 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. STEP 1 ‘Arrow’ sticker at front Wood Screw for Caster Non-Locking Caster Attach Casters underneath Base (C) with Wood Screws for Caster, with Locking Casters on the front.
PAGE 3
Assembly Instructions 3/5 STEP 3 Head Cap Bolt Attach Side Rack (H) to Side Panel (A) with Head Cap Bolts. H Slide Brush Chrome Pipes (J) and Base Rack (K) into Side Rack (H). A Attach Side Rack (I) to Side Panel (A) with Head Cap Bolts. K I J Head Cap Bolt for Side Tower Bar STEP 4 B L STEP 5 Attach Side Tower Bar (L) to Side Panel (B) with Head Cap Bolts for Side Tower Bar. Head Cap Bolt for Top Attach Top to unit with Head Cap Bolts for Top.
PAGE 4
Assembly Instructions 4/5 Drawer (P) Bottom P1 STEP 6 P3 Attach Drawer Front (P1) and Drawer Back (P2) to Drawer Side (P3) with Wood Screws (long). P2 P4 Attach Drawer Side (P4) to unit with Wood Screws (long). Roller at back STEP 7 Slide Drawer Bottom (P5) into the grooves of Drawer Sides (P3) and (P4) until it meets Drawer Front (P1). P1 P3 P5 Attach Drawer Bottom (P5) to unit with Wood Screws (short). P2 P4 STEP 8 Attach Pull Handle with Machine Screws. Part List P1. Drawer Front 1 pc.
PAGE 5
Assembly Instructions 5/5 P O N B A STEP 9 Attach Knobs to Doors (N) and (O) with Machine Screws. (See Figure 4) Attach Doors (N) and (O) to unit by sliding the door lift hinges into side panel lift hinges. (See Figure 5) Slide Drawer (P) into position. Cover all holes with Wood Plugs.
PAGE 6
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.