Owner Manual
Assembly drawing
AC power plug
DC plug
Mounting stickers
Massage headrest
function plug
Project
number
Name
Massage headrest
Backrest cushion
Chair frame
Beam
Screw M6x83
Screw M6x108
Nut M6
Quantity
Operating Instructions
Operation Guide
Instructions
Instructions
key operation:
2. Sit on the massage chair in an upright position, resting your back and neck
on the back of the massage chair respectively.
3. Press the ON button to begin the massage.
Power button: Press once to turn on; this will start at default mode. Press the
power button again to turn off.
Massage mode keys: There are five modes in total. By pressing once, the first
mode of the upper back and neck massage rollers will start massaging
simultaneously. When the heating light of the massage head goes out press
again and the second mode will start. This will initiate the massage rollers of
the lower back and head massage areas. When the heating light goes out,
the neck massage function will stop. Press again and the third mode will
initiate the neck message again. When the heat light goes out, the back
massagers will stop. By pressing a fourth time, all massage functions will
cease. The fifth mode will restore all functions to the default mode, turning on
all massage functions.
Fixed-point massage button: Press once and the head massage rollers will
move up and down in a small range. Press again to resume full body
massage functions
.
Fixed-point massage button: Press once and the head massage rollers will
move up and down in a small range. Press again to resume full body
massage functions
.
Note: Timed circuit of 20 minutes
.