Owner Manual

Failure phenomenon
Product Does
Not Work
Stops working
suddenly during
the massage
Noise from the chair
The chair may make
a humming noise when it is operating.
Mains interruption.
If the load and pressure on
the massage chair is too heavy.
Due to the overheating protection function,
if the motor becomes too warm, it will turn off.
After the massage chair has completed a 20
minute circuit, it will automatically
switch to standby mode.
Check whether the power cord plug is
securely plugged into the electrical outlet
(and the DC output plug and
the machine input socket.)
Check the power plug and socket,
and make sure that each plug is in
good contact with the socket.
If you wish to start the massage again,
push the power button and another
20 minute circuit will start.
Please wait until the motor has
cooled down before resuming usage.
Please adjust your position to reduce
the operation stress of the massage rollers.
Use it after the power supply is restored.
This sound is normal and does not need to be
reported to the manufacture for maintenance.
Product name
Executive standard
parameter
Massage rocking chair
Rated voltage
Rated
input power
Input polarity
Possible Reasons
Approach
※ The company reserves the right to make changes to the product
design, subject to change without notice.
If the above troubleshooting solutions have not provided the needed assistance,
please contact the retailer where you made your purchase.
1.After using and before cleaning, always power off and unplug the massage chair
from the electrical outlet
.
2.After each use, using a soft dry cloth, remove dust and dirt from the chair. If neces-
sary, you may use a small amount of natural detergent. However, do not use any
chemicals, solvents, metal brushes, etc .
3.DO NOT immerse or wash the massage chair in water OR remove the individual
pieces to wash in water separately.
4. Do not use or place the massage chair outdoors, in direct sunlight, or in highly humid
or wet areas such as bathrooms, saunas, or near swimming pools .
5. Always store and use indoors in a dry and ventilated place .
1. In order to prolong the life of and ensure the proper operation of the massage chair,
do not press hard, stand on, or place heavy items on it
.
2. This product is not designed to be used as a medical device to treat any illnesses or
diseases, or for commercial purposes.
3. If you experience discomfort or pain during or after usage, discontinue use and
consult your physician.
Cleaning and Maintenance ● Tips Troubleshooting ● Product Parameters
Cleaning and Maintenance
Troubleshooting
Product Parameter
Tips