Installation & Assembly

ManualsBrandsRed Barrel Studio ManualsAll Outdoor Fireplaces & Fire PitsNerida 22.75'' H x 34.75'' W Steel Wood Burning Outdoor Fire Pit with Lid

Assembly Instructions

Product Name: Fire pit

WARNINGS:

 This fire bowl is intended for outdoor use only.

 This fire bowl is intended for burning wood logs only. Do not burn coal, leaves, or other combustible

materials in the bowl.

 Not for use by children. Keep children and pets away from this fire bowl.

 When in use, the handle on the mesh cover can reach extremely high temperatures that can cause

serious injury to an unprotected hand. Protective gloves and long-handled tools are recommended for

use with this fire bowl.

 Never leave the burning fire bowl unattended, and always extinguish the fire completely before

leaving the fire bowl.

 Do not use on a wooden deck or combustible surface such as grass, leaves, mulch, etc.

 Do not use fire bowl on heat-sensitive or combustible structures.

 Check local fire regulations and municipal by-laws for information regarding the safe use of this

product.

 Read all safety guidelines, warnings, instructions, and operating rules carefully before assembling and

using this product.

 Some parts may contain sharp edges. Wear protective gloves if necessary during assembly and use.

PARTS LIST

HARDWARE LIST

Note: You will need a screwdriver to complete

the assembly.

No.

PARTS

Qty

Handle

Mesh Cover

Fire Bowl

Legs

Base Ring

Poker

No.

Hardware

Qty

M6*10mm Bolt

M6 Nut

Summary of content (4 pages)

PAGE 1
Assembly Instructions Product Name: Fire pit WARNINGS:  This fire bowl is intended for outdoor use only.  This fire bowl is intended for burning wood logs only. Do not burn coal, leaves, or other combustible materials in the bowl.  Not for use by children. Keep children and pets away from this fire bowl.  When in use, the handle on the mesh cover can reach extremely high temperatures that can cause serious injury to an unprotected hand.
PAGE 2
Step 1: Attach Handle (A) to Mesh Cover (B) using Nut (BB). Fully tighten the nut. BBx1 Step 2: Place the Base Ring (E) on the bottom of Fire bowl (C), Attach Legs (D) to Fire Bowl (C) using M6 x 10mm Bolts (AA), do not tighten the bolts. Then attach Legs (D) to Base Ring (E) using M6 x 10mm Bolts(AA) . Tighten all the hardware. AA E D AA C AAx12 Step 4: Place the Mesh Cover (B) on the fire bowl (C) in order. Keep Poker (F) near the fire pit for use anytime. Now the fire pit is ready for use.
PAGE 3
Instructions d’assemblage Nom du produit: Foyer patio AVERTISSEMENTS:           Ce foyer est conçu pour une utilisation en extérieur uniquement. Ne pas l’utiliser sur des terrasses en bois. Ce foyer est conçu pour brûler des bûches de bois uniquement. Ne brûlez pas de charbon, de feuilles ou d’autres matériaux combustibles dans la cuvette. Ne doit pas être utilisé par les enfants. Gardez les enfants et les animaux domestiques à l'écart du foyer.
PAGE 4
BBx1 Étape 2: Placez l'anneau (E) sous la cuvette à feu (C), fixez les pieds (D) à la cuvette à feu (C) à l'aide des boulons M6 x 10 mm (AA), ne serrez pas les boulons. Ensuite, fixez les pieds (D) à la bague de base (E) à l’aide de boulons M6 x 10mm (AA). Serrer l’ensemble du matériel. AA E D AA C AAx12 Étape 4: Placez le couvercle en mailles (B) sur la cuvette à feu (C) dans l'ordre. Gardez le tisonnier (F) près du foyer pour pouvoir l'utiliser à tout moment.