Congratulations! This product will provide many years of service if you adhere to the following guidelines for assemble, operation , care and maintenance . Please read all instructions carefully before assembling and using this recliner chair. Improper assembly can result in damage to your chair or cause harm to your child. Proper assembly is critical to ensure a safe and comfortable end result.
Important Safety Instructions A WARNING -To reduce the risk of electric shock, serious injury or death: •We do not recommend the use of throws or additional loose covers on or near the moving mechanisms. • Plug the power lead directly into an wall electric socket. Do not use an extension cord, adapter or surge protector. • To avoid over heating do not cover the transformer. • Disconnect the electrical plug from outlet before cleaning, moving, servicing or when not in use for an extended period of time.
Assembly Steps Step 1 Take out the binding power adapter Power Adapter A WARNING -To reduce the risk of electric shock, serious injury or death: DO NOT PLUG IN UNTIL CHAIR ASSEMBLED -5-
Assembly Steps Step 2 Attach the Backrest to the Seat Base Part A ...,- (Backrest) Part B (Seat Base) Push \ 0 Slide the backrest female brackets onto the backrest male Brackets. Push until you hear a click on both sides. This indicates that the backrest locks into place.
Assembly Steps Step 3 Assemble finished Beating and Aligning Your recliner chair just went on a long trip. During storage and transport, some upholstered parts may have been pushed in and stitching lines may have been moved. Take a couple of minutes to straighten and beat the upholstered parts. If you followed all steps correctly, your chair is now perfectly set up. Please read all further instructions on your chair's functions and cover maintenance.
Connect the power adapter with a wall outlet Button on the chair armrest Power Adapter Plug in the power adapter to a wall outlet Green LED light indicates that the power is on Blue LED light on the button indicates that the power is on Note: If your chair is not functioning after following these steps, please check the cord underneath the chair is fully plugged into the chair motor. Chair Functions Power Reclining Power Button CAUTION P.
Power Recliner Instruction [ From Chair to Recliner] When sitting on the chair, simply press the button located at the outside right armrest, the chair will be made to recliner. Note: Before first use, the chair should be tested to ensure that all functions are working correctly.
Power Recliner Instruction [ From Recliner to Chair] Simply press the button, this moves your chair's footrest back under the seat and your chair is returned to the upright position. CAUTION J Before closing, make sure that there are no persons, pets or extremities in the way. Do not allow children to play on this chair or operate the mechanism. Always leave in an upright and closed position.
How to Disassemble 1. Unplug the power adapter x2 2. Use your hand or a strong tool (not included) to upwarp the small piece of metal grooves, then the backrest will be pulled out.
A CAUTION X Take care when adjusting positions to avoid trapping or pinching of body parts. A � DO NOT stand/sit on the edge of the seat, armrests, open footrest or on the backrest as this could make the recliner tip over. To reduce the risk of head entrapment and other injuries, keep children and pets away from openings and moving parts in and around recliner. DO NOT leave children unattended on or beside the recliner. X Note: Do not expose your chair to direct sunlight .
q
Contact Information We're here to help. For any missing or damaged parts or installation assistance, please call us! We will use the information provided on-line to contact you only if there is a safety alert or recall of this product. We will not sell, rent, or share your personal information. You will need below codes when contacting customer services.
