WRITING OFFICE DESK 1/9
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service In order to assist you in a timely manner, please have the following information ready: Model # _______________________ Part Number or Letter_______________________ Purchased at ___________________Date of Purchase ___________________________ If you wish to return the product, please contact the retailer where the product was purch
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A C B TOP QTY 1 KEYBOARD QTY 1 LEG QTY 4 PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 2 1 ALLEN KEY BOLT: M6 X 70mm - QTY 8 LOCK WASHER: Ø10 / Ø6 X 1.
COMPONENTS – KEY DIAGRAM A C B B B B 6/9
ASSEMBLY STEP 1 B B B B B A 1 2 1. Attach pre-drilled holes of Legs B into edge angle on bottom of Top A using Allen Key Bolts, Lock Washers and Washers 1 . 2. Use Allen Key 2 to tighten Bolts. Do not over-tighten. STEP 2 4 3 1. Use a Phillips screwdriver to attach Handle 3 to outside the middle drawer of part A . 2. Use a Phillips screwdriver to attach Handles 4 to outside the side drawers of part A .
ASSEMBLY STEP 3 A C 1. Insert assembled Keyboard C into glides on assembled desk.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line or by email. We reserve the right to repair or replace the defective product, at its discretion.
