Owner Manual

ManualsBrandsRed Barrel Studio ManualsChairs & SeatingReclining Heated Massage Chair

Recliner: The chair’s dual-function operation

allows you to recline and elevate your tired feet

at once.

Durable mechanism: Rigorously testing

25000 times to ensure mechanical and

building durability.

Deluxe Design: This lift chair is the perfect

companion for any media room or living room.

Summary of content (7 pages)

PAGE 1
Recliner: The chair’s dual-function operation allows you to recline and elevate your tired feet at once. Durable mechanism: Rigorously testing 25000 times to ensure mechanical and building durability. Deluxe Design: This lift chair is the perfect companion for any media room or living room.
PAGE 2
FITTING LIST A*1 B*1 Chair Back E*1 Remote C*1 Right Armrest D*1 Left Armrest F*1 G*1 H*2 Transformer Po w e r C o r d S u p p o r t i n g F o o t I*4 Chair Seat J*4 Screw Gasket ASSEMBLY INSTRUCTIONS  STEP 1: Find a small bag under the Chair Seat (D). Take out Supporting Foot(H), Screw(I) and Gasket(J) from the small bag. Assembly the two Supporting Feet as shown on the bottom of mechanism to avoid toppling and falling.
PAGE 3
 STEP 3: Connect Remote(E) with the motor (Assembled under the seat).  STEP 4: Attach Chair Back (A) to Chair Seat (D) by aligning the metal grooves on Chair Seat (D) and Chair Back (A). Ensure the Seat Back slides down to the bottom of the Chair Seat (D)’s metal grooves.  Step 5:Connect the power connection plugs (①②③) as shown behind the seat correspondingly. ① ② ③ D  STEP 6 : Connect Transformer (F) with Motor (Assembled under the seat). Connect Power Cord(G) with Transformer(F) as shown.
PAGE 4
REMOTE OPERATION INSTRUCTIONS  Press ON/OFF to start massage function. It runs from mode 1st to 10th in automatic style (signal will be on, each mode switch to the next per 1 minute).  Press INTENSITY to adjust the massage intensity (signal lllllll will be on)  Press AUTO to set automatic mode circle, and press it again to get back to manual style.  Press TIMER to set up running time from 5 minutes to 60 minutes.  Press MODE△/MODE▽ to select different manual vibration mode.
PAGE 5
TO STORE OR CLEAN Maintenance Instructions Rotate reversible cushions regularly. Vacuum your furniture regularly with upholstery tools Do not expose your furniture to Do not place your furniture close to a prolonged periods of direct sunlight. radiator or similar heat source.
PAGE 6
ATTENTIONS Moving the chair carefully to avoid falling armrests hurting your feet 6
PAGE 7
ATTENTIONS After installation, in order to ensure that the chair can work normally, please follow the steps below to check： ① Check all the cables are connected correctly. Check if the cables under the seat is loosed or not. The red wire should be connected to the red one. The grey wire should be connected to the grey one. The white wire should be connected to the white one. ② Check if the light of the transformer is on. ③ Check if the light of remote is on.