Installation & Assembly

ManualsBrandsRed Barrel Studio ManualsBedsUpholstered Low Profile Platform Bed

IMPORTANT NOTE

1. PLEASE CHECK THAT ALL PARTS ARE PRESENT BEFORE YOU START

THE ASSEMBLY OF YOUR FURNITURE.

2. FOR THE PROTECTION OF YOUR FURNITURE, PLACE ALL PARTS ON A

CLEAN AND SMOOTH SURFACE TO PREVENT ANY DAMAGE.

3. DO NOT USE POWER TOOLS TO ASSEMBLE THE BED.

4. PLEASE PERIODICALLY CHECK ALL FITTINGS AND RE-TIGHTEN AS

NECESSARY.

5. DO NOT USE THE BED UNLESS ALL BOLTS AND SCREWS ARE FIRMLY

SECURED.

6. YOU CAN ASSEMBLE IT WITH OUR PACKAGING TOOLS OR WITH A

HOME ELECTRIC DRILL, AS SHOWN BELOW.

1/6

STANDARD BED

Summary of content (6 pages)

PAGE 1
STANDARD BED IMPORTANT NOTE 1. PLEASE CHECK THAT ALL PARTS ARE PRESENT BEFORE YOU START THE ASSEMBLY OF YOUR FURNITURE. 2. FOR THE PROTECTION OF YOUR FURNITURE, PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE TO PREVENT ANY DAMAGE. 3. DO NOT USE POWER TOOLS TO ASSEMBLE THE BED. 4. PLEASE PERIODICALLY CHECK ALL FITTINGS AND RE-TIGHTEN AS NECESSARY. 5. DO NOT USE THE BED UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. 6.
PAGE 2
PART LIST (1)Headboard Pane x 1pc (2)Footboard x 1pc (3)Side Rail I x 2pcs (4)Side Rail II x 2pcs (5)Leg x 2pcs (6)Support Leg x 6pcs (7)Support Leg II x 2pcs (8)Headboard support I (9)Headboard support II (10)Centre Support Bar x 1pc x 1pc x 2pcs (11)Slat x 2pcs (12)Support Bar x 4pcs (13)Headboard wing (Right) x 1pc (14)Headboard wing (Left) x 1pc HARDWARE LIST (H1)Bolt M8 x 20mm x 4pcs (H2)Bolt M8 x 35mm x 24pcs (H3)Bolt M8 x 40mm x 10pcs (H4)Spring Washer x 26pcs (H5)Flat Washer M8x17mm
PAGE 3
STEP 1 SCREW LEGS (5) INTO FOOTBOARD (2). 2 2 5 X2 STEP 2 FIXING HEADBOARD WING (RIGHT) (13) AND HEADBOARD WING (LEFT) (14) TO HEADBOARD PANE (1). SECURE USING FIXINGS (H3), (H4), (H6) AND (H9). 13 & 14 13 Open the zipper H6 1 H9 H4 H3 X2 14 STEP 3 FIXING HEADBOARD SUPPORT I (8) AND HEADBOARD SUPPORT II (9) TO HEADBOARD PANE (1). SECURE USING FIXINGS (H3), (H4), (H5) AND (H6).
PAGE 4
STEP 4 FIXING SUPPORT LEG II (7) TO SIDE RAIL I (3) AND SIDE RAIL II (4). SECURE USING FIXINGS (H2), (H4), (H5) AND (H6). H6 H2 H4 H5 3 4 3 7 X2 7 4 STEP 5 FIXING SIDE RAIL I (3) AND SIDE RAIL II (4) TO HEADBOARD SUPPORT I (8) AND HEADBOARD SUPPORT II (9). SECURE USING FIXINGS (H1), (H4), (H5) AND (H6).FIXING SIDE RAIL I (3) AND SIDE RAIL II (4) TO FOOTBOARD (2). SECURE USING FIXINGS (H2), (H4), (H5) AND (H6).
PAGE 5
STEP 6 FIXING Support Bar (12) TO SIDE RAIL I (3) AND SIDE RAIL II (4). SECURE USING FIXINGS (H2), (H5) AND (H6). 3&4 12 H2 H5 H6 X4 3 4 4 3 STEP 7 FIXING SUPPORT LEG (6) TO CENTRE SUPPORT BAR (10) BY USING (H8).
PAGE 6
STEP 8 FIXING SLAT (11) TO SUPPORT BAR (12) AND CENTRE SUPPORT BAR (10) BY USING (H7). H7 3&4 3 11 X6 11 H7 10 11 4 10 X3 STEP 9 FIXING SLAT (11) TO SUPPORT BAR (12) AND CENTRE SUPPORT BAR (10) BY USING (H7). H7 3&4 11 X6 H7 4 11 10 11 3 X3 Job Complete ! In the interest of our environment please dispose of all packaging thoughtfully.