Assembly Guide . �m Coffee Table Keep manual for future reference.
I Get Ready to Assemble For best results, keep these tips in mind: (D We know you want to finish this assembly @ If your Uoor isn't carpeted, assemble this as quickly as possible, but trust us: you'll product on the empty carton to avoid have a better experience if you take it one scratching. step at a time. @ ,Give yourself some room to work near @ Do you have a friend who owes you a favor? Some steps may go a little easier where you want the fully assembled with a second set of hands.
IMPORTANT SAFETY INFORMATION PLEASE READ WARNINGS Improper use can cause safety hazards, or damage to your furniture and household items. Warning Do Serious injury • may occur. Don't Assemble following all instructions using all indicated parts and hardware provided. • Do not move unit when loaded. Improper assembly, use or loading can Do not load with a television lead to product instability, tip-over or or other heavy equipment. collapse.
I Get to know your Boards
I Get to know your Fasteners Fasteners are shown actual size.
I Get to know your Hardware Hardware not to scale.
STEP 1 I Prepare Drawer Fronts [4] H100444 H158933 � Drawer Bracket ► H35251 [ 4] #8 X 3/4" [ 2] [4] Handle #10 X 1/2" H35251 2X ' ' H35251 ' ' d> N ' '' ' ' ' '
I STEP 2 Team Lift Build Drawers H101725 � [ 8] [ 8] H23198 #6 X 1/2" #10 X 1-1/2" H101725 Finished edge Borde terminado Cote fini Finished edge Borde terminado Cote fini N H101725 > Q p R Finished Side Lado Terminada Cote Fini 2X
STEP 3 I Separate Slides Slides Must Be Separated Before Assembly. After Separated, Set Aside Until Needed for Assembly. Las diapositivas deben separarse antes del montaje. Despues de la separaci6n, dejelo a un lado hasta que sea necesario. Les glissieres doivent etre separees avant !'assemblage. Apres la separation, mettez de cote jusqu'au moment de !'assemblage.
STEP 4 I Install Slide Runners Q184100 1 2 How to Separate and Install Drawer Slides 10"(250mm) Slide Runner H101725 � #6 X 1/2" 1 *\ [2] Orientation Orlentacl6n L'orlentation [12] Orientation Orlentacl6n L'orlentation 0 2X
STEP 5 H 1 ao6o4 I Prepare Panels rrrr------o}anr [a1 KD Bolt 2X cb 2X
STEP 6 I Prepare Panels [ 12] H38169 Wood Dowel 8 x 30mm D 2X Safety glasses Gafas de seguridad Lunettes de protection
STEP 7 I Assemble Panels � [8] Cover Cap How to Tighten KD Cams H181468 t=t Team Lift 2X Q ' ' ' D 0 ' ' ' ' �' ' [8]
STEP 8 I Install Mounts Q184100 [2] * H101725 � [12] How to Separate and Install Drawer Slides #6 X 1/2" * t=t Team Lift 10"(250mm) Slide Mount Orientation Orlentacl6n L'orlentation 1 ' '' '' ' ' 2 Orientation Orlentacl6n L'orlentation 1 1 T D H 3 T 3 T 2 T' ' ' ' � Orientation Orlentacl6n L'orlentation 2X
STEP 9 I Insert Fasteners H171556 [ 4] Quick Connect '' ' '' ' D 2X MAY HAVE TO SQUEEZE PLASTIC TO INSERT INTO HOLE. PUEDE TENER QUE APRETAR PLJ\STICO PARA INSERTAR EN EL AGUJERO. PEUT AVOIR A PRESSER EN PLASTIQUE A INSERER DANS LE TROU.
STEP 10 I Prepare Panel H171556 [2] Quick Connect I ' '' ' ' ' '' '' C!:> E I : '' ' '' ' ' '' C!:> MAY HAVE TO SQUEEZE PLASTIC TO INSERT INTO HOLE. PUEDE TENER QUE APRETAR PLJ\STICO PARA INSERTAR EN EL AGUJERO. PEUT AVOIR A PRESSER EN PLASTIQUE A INSERER DANS LE TROU.
STEP 11 I Assemble Panels 1 2 H181468 [2] How to Tighten KD Cams Team Lift � '' '' ' ' © E
STEP 12 I Assemble Panel 1 2 H181468 How to Tighten KD Cams Team Lift C) [2]
STEP 13 I Assemble Panel [2] Cover Cap H181468 How to Tighten KD Cams [2] KDCam Team Lift �
STEP 14 t=t Team Lift F I Assemble Panels H23198 � #10 ' X [ 6] 1-1/2" ' '' '' ,.
STEP 15 I Insert Fasteners [6] H171556 Quick Connect 2X MAY HAVE TO SQUEEZE PLASTIC TO INSERT INTO HOLE. PUEDE TENER QUE APRETAR PL.A.STICO PARA INSERTAR EN EL AGUJERO. PEUT AVOIR A PRESSER EN PLASTIQUE A INSERER DANS LE TROU.
STEP 16 I Assemble Panel 1 2 H181468 �"� �� KDCam How to Tighten KD Cams Team Lift [3]
STEP 17 I Assemble Panel 1 2 H181468 [3] KDCam How to Tighten KD Cams Team Lift F
STEP 18 H23370 I Assemble Rails � #10 X 1-1/4" [12] l l ' ' ' '' ' '' ' r ' ' ' ' M r ' L r r
STEP 19 I Assemble Panels H39922 [4] H35251 ► #10 X I 16] 1/2" T 1 ' '' '' '' ' ' '' '' ' ' ' ' '' '' '' ' ' ' '' '' '' ' "' B A 'r :I : : '=' ' ' 'f : ' ' ,
STEP 20 I H38169 Wood Dowel 8 x 30mm Prepare Rails [2] Safety glasses Gafas de seguridad Lunettes de protection 2X � m '' '' ' ' '' '' ' J
STEP 21 H23370 I Assemble Rails a\\\\\\\\\\\\\\\\� #10 X 1-1/4" I4l
STEP 22 I Insert Fasteners H171556 Quick Connect MAY HAVE TO SQUEEZE PLASTIC TO INSERT INTO HOLE. PUEDE TENER QUE APRETAR PLJ\STICO PARA INSERTAR EN EL AGUJERO. PEUT AVOIR A PRESSER EN PLASTIQUE A INSERER DANS LE TROU.
STEP 23 I Assemble Panels � Cover Cap How to Tighten KD Cams [8] H181468 t=t Team Lift KO Cam A ' -� � ,Ii\ ()-'.
STEP 24 Team Lift I Assemble Panels H23370 K r With assistant carefully turn unit around. ;on la ayuda de un asistente,gire con cuidado el dispositivo. vec I 'aide de I' assistant, tournez prudemment le dispositif.
STEP 25 Team Lift I Insert Drawers
STEP 26 I Drawer Adjustment DRAWER FRONT VIEW How to Adjust Drawer Fronts �I IL---_\ �I �I �I t REQUIRED TOOL: PHILLIPS SCREWDRIVER HERRAMIENTA REQUERIDA: DESTORNILLADOR PHILLIPS OUTIL REQUIS: TOURNEVIS CRUCIFORME 1. LOOSEN SCREWS. 2. ADJUST DRAWER FRONTS. 3. TIGHTEN SCREWS. 1. Afloje los tornillos 2. Ajustar frentes de caj6n 3. Apriete los tornillos 1. Desserrer les vis 2. Ajuster les fa<;ades des tiroirs 3.
STEP 27 I Maximum Loading and Cleaning Gently clean surfaces with a damp sponge eraser. MAXIMUM WEIGHT: 50 LBS (22.68 KG) How to Clean the Surface PESO MAXIMO: 50 LIBRAS (22.68 KILOGRAMO) POIDS MAXIMUM: 50 LIVRES (22.68 KILOGRAMME) MAXIMUM WEIGHT: 15 LBS (6.8KG) PESO MAXIMO: 15 LIBRAS (6.8KILOGRAMO) POIDS MAXIMUM: 15LIVRES (6.8 KILOGRAMME) MAXIMUM WEIGHT: 25 LBS (11.34KG) PESO MAXIMO: 25 LIBRAS (11.34KILOGRAMO) POIDS MAXIMUM: 25 LIVRES (11.34 KILOGRAMME) Congratulations! You are all done.
PARTS LIST A [1] W197167 G [1] W197173 M [4] W197179 B [2] W197168 H [2] W197174 N [2] W197180 C [2] S197169 I [2] W197175 0 [2] W197181 D [2] W197170 J [2] W197176 P [2] W197182 E [1] W197171 K [4] W197177 Q [2] W197183 F [1] W197172 L [2] W197178 R [2] W197184 H200205 � I 14] [2] H200219 Handle Cover Cap A [1] W197185 G [1] W197191 M [4] W197197 B [2] W197186 H [2] W197192 N [2] W197198 C [2] S197187 I [2] W197193 0 [2] W197199 D [2] W197188 J [2] W197194 P [2] W197200
PARTS LIST A [1] W197203 G [1] W197209 M [4] W197215 B [2] W197204 H [2] W197210 N [2] W197216 C [2] S197205 I [2] W197211 0 [2] W197217 D [2] W197206 J [2] W197212 P [2] W197218 E [1] W197207 K [4] W197213 Q [2] W197219 F [1] W197208 L [2] W197214 R [2] W197220 H200203 � I 14 l [2] H180971 Handle Cover Cap A [1] W197221 G [1] W197227 M [4] W197233 B [2] W197222 H [2] W197228 N [2] W197234 C [2] S197223 I [2] W197229 0 [2] W197235 D [2] W197224 J [2] W197230 P [2] W197236
PARTS LIST A [1] W197239 G [1] W197245 M [4] W197251 B [2] W197240 H [2] W197246 N [2] W197252 C [2] S197241 I [2] W197247 0 [2] W197253 D [2] W197242 J [2] W197248 P [2] W197254 E [1] W197243 K [4] W197249 Q [2] W197255 F [1] W197244 L [2] W197250 R [2] W197256 H170595 I 14 l � [2] H180971 Handle Cover Cap A [1] W190434 G [1] W190440 M [4] W190446 B [2] W190435 H [2] W190441 N [2] W190447 C [2] S190436 I [2] W190442 0 [2] W190407 D [2] W190437 J [2] W190443 P [2] W190408
WARRANTY INFORMATION/INFORMATIONS POUR LA GARANTIE/INFORMACIÓN DE GARANTÍA OUR WRITTEN WARRANTY TO YOU In order to provide you with timely assistance, please thoroughly inspect your furniture for missing or defective parts immediately after opening the carton. To receive replacement or missing parts under this warranty, call our Consumer Service Department . Please have the Model, Part, and Lot Numbers found in the instruction manual available for your reference.
