Installation & Assembly

Table Of Contents

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

4 1

In order to prevent product tip over, please follow the instruction below to secure the unit to the wall.

STEP 3

Recommended Maximum Weight

Assembly Instruction

5 Tier Corner Display Rack Multipurpose

Shelving Unit

*Unit in Pound(lbs)

CABLE TIE

WALL

1SET

Hardware List Qty

1/4”

DRILL BIT

No Tools Required

Recomm. 1 Person

Approx. 10 minutes

PAGE 1
STEP 3 In order to prevent product tip over, please follow the instruction below to secure the unit to the wall. Hardware List Qty Assembly Instruction 5 Tier Corner Display Rack Multipurpose Shelving Unit 1SET 1/4” DRILL BIT Approx. 10 minutes WALL Recomm. 1 Person CABLE TIE Recommended Maximum Weight No Tools Required 10 WARNING: 10 >This unit has been designed to support the maximum loads shown.
PAGE 2
No Hardware List Qty No Parts List Qty 1 Long Pole 12pcs A Top / Shelf Panel 4pcs 2 Top Cap 4pcs B Bottom Panel 1pc 3 Round Leg 4pcs STEP 1 STEP 2 1.1 Attach Long Pole (1), Top Cap (2) and Round Leg (3) to Bottom Panel (B). Attach Top Panel (A) and tighten Top Cap (2), as shown: 1.2 Attach Shelf Panel (A) and tigthen Long Pole (1) , as shown: 2 A 1 A finished surface A A A finished surface STEP 1.4 FINISHED SURFACE A A STEP 1.3 A A A finished surface STEP 1.