Owner Manual
Table Of Contents
UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
04
|
TREY PACKAGE CONTENT
1 Blade Set of 3
2 Blade Support Plates
Mounting Bracket
Mounting Plate
Decorative Ring
3
4
5
6
7
8
9
10
11
1
5
11
4
8
7
2
9
10
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
6
3
Receiver Incl. 5 Wire Nuts
16W LED Assembly
Glass Shade
Wall Control w/12v Battery
Wall Plate, Face Plate,
2 Sets of Mounting Screws,
and Machine Screws
Hardware Bag
Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
applicable. Save the screws.
19
Bracket Mounting Hardware
(wood screws, screws, lock
washers, washers, wire nuts),
Blade to Motor Screws
w/Lock Washers,
Balance Kit
BL90752Fxx
In Hardware Bag
MB902752
CT902752Fxx
X
X
E902752LED
GL902752OPET
CN902752
980013FAS
HW902752Fxx
XX=FAN FINISH