Owner Manual

Table Of Contents

INSTALLING THE FAN

REMEMBER to turn oﬀ the power. Follow the steps below to hang your

fan properly.

Carefully lift fan motor assembly (without the blades) into position by

hanging the motor assembly onto the hook from the ceiling mounting

plate allowing it to hang freely .

You are now ready to make the electrical connections.

Fan

Motor

Outlet Box

INSTALLATION OF SAFETY CABLE SUPPORT

Attach the wood screw and the ﬂat washer to the ceiling joist as

shown (do not fully tighten). Slide the cable clamp onto the

safety cable from the fan. Loop the safety cable around the

wood screw that was just attached to ceiling joist. Feed the end

of the cable into the clamp and pull as much cable through as

possible. Firmly tighten screw in the clamp. Cut oﬀ excess cable.

Safety Cable Clamp

Safety Cable

Wood Ceiling Joist

Safety Cable Loop

Wood Screw

And Washer