Owner Manual

ManualsBrandsRed Barrel Studio ManualsAll Christmas TreesDunhill Fir Slim Green Artificial Christmas Tree with Multi-Color Lights

Assembly Instructions

FOR INDOOR USE ONLY

IMPORTANT: It is recommended that you retain the carton for storage purposes. If you will dispose of the carton,

please write the product information found on the carton in spaces at bottom of this page, for future reference.

CONTENTS

Branch Shaping Instructions . . . . . . . . . . . . . . . . . . . . 2

Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3

Pre-Lit Tree Connections . . . . . . . . . . . . . . . . . . . . . . . 3

Dual Color

Lights Operation . . . . . . . . . . . . . . . . . . . . 4

Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Fuse Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Light Parade™ Multi-Function Light Sets . . . . . . . . . 4

LIMITED WARRANTY FOR ARTIFICIAL CHRISTMAS TREES

Please read this warranty thoroughly and familiarize

yourself with its restrictions and requirements.

warrants its 6.5 ft. and taller trees

against

manufacturer-only defects for a period

of five (5) years from the date of purchase

indicated on your sales receipt. (White Trees, one

year). Manufactured defective parts will be repaired or

replaced.

The lights on Pre-Lit Trees are warranted for

a period of

two (2) years from date of purchase; three (3)

years for low voltage LED trees (see below).

This Warranty does not apply to trees that are used as

display trees in the store. This warranty is only valid on

purchases made from authorized NTC retailers.

does not warranty tree stands that break

due to stress from tipping or moving of fully

assembled/decorated tree. This tree is for indoor use only.

Outdoor use of this tree voids the warranty.

PRE-LIT TREES LIMITED WARRANTY:

warrants the light sets on its Pre-Lit

trees against

manufacturer-only defects in

material or workmanship for a period of two

(2) years from date of purchase; three (3) years

for low voltage LED trees. Culpability of Company is

limited to replacement of defective light set only.

To have the Warranty placed into effect, completed

online registration of product is required with inclusion

of sales receipt noting purchase date and place.

Shipping Costs under PRE-LIT WARRANTY TERMS:

Please note the following terms regarding shipping of

product for warranty service:

1) will pay the cost of shipping (to

our facility and back to customer), under warranty terms,

during the first season of use. Receipt dated prior to

December 25 of purchase year constitutes first season of

use. Please note that it is the responsibility of the customer

to obtain a box of the smallest possible size and shape to

securely contain the part being shipped.

2) After the second season of use, the customer will be

responsible for cost of delivery to our facility.

will pay the return cost delivery of parts repaired

due to manufacturing defect. Customer will be responsible

for return shipping cost of any parts repaired due to misuse

or neglect.

3) All shipping costs to and from our facility for warranty

service after the third season of use will be the

responsibility of the customer.

REQUIREMENTS FOR WARRANTY SERVICE:

Customers are required to contact

for AUTHORIZATION OF RETURN prior to

shipping product for warranty service.

Information required will include: product item number, UPC

bar code number, name of store where purchased, a

detailed description of the problem, and your address and

phone number.

At the discretion you may either

receive a replacement part or be instructed as to which

part(s) to ship prepaid for our inspection

and determination and/or possible repair. Replacement or

repair as prov

ided by this limited warranty is our exclusive

remedy to the consumer and does not

liable for any incidental or consequential damages.

IMPORTANT NOTES:

Removing factory attached functioning or non-functioning

light strings from any section of your pre-lit tree will void

the warranty.

Please retain the product carton for storage purposes

and/or for use in the event of warranty service for product

shipment.

Keep product away from heat and moisture. This limited

warranty does not cover damage resulting from accident,

misuse, abuse, negligence, or normal wear. In these

instances, parts can be purchased at a reasonable fee plus

shipping charges.

IMPORTANT:

SAVE YOUR SALES RECEIPT.

It will be needed when requesting

warranty service.

SAVE THESE INSTRUCTIONS

Summary of content (8 pages)

PAGE 1
Assembly Instructions IMPORTANT: It is recommended that you retain the carton for storage purposes. If you will dispose of the carton, please write the product information found on the carton in spaces at bottom of this page, for future reference. CONTENTS Branch Shaping Instructions . . . . . . . . . . . . . . . . . . . . 2 Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-Lit Tree Connections . . . . . . . . . . . . . . . . . . . . . . . 3 Dual Color® Lights Operation . . . .
PAGE 2
CAUTION: IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS • Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupter (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. • This seasonal use product is not intended for permanent installation or use.
PAGE 3
Assembly Instructions Fig. 7 Fig. 8 Each carton contains one bottom section, one middle section (larger trees include additional middle sections), one top section and a metal tree stand. Special note about larger trees: Some of the larger trees (9 ft. and taller) will include more than one middle section. If your tree contains additional middle section(s), note that each will be numbered in ascending order. The tree bottom section (which inserts into tree stand) will be number 1.
PAGE 4
STYLE 4: PowerConnect. These trees do not require the connection of light strings between sections. Electrical connections are made when each section is assembled. During tree assembly or disassembly, DO NOT DISCONNECT any of the factory connected light strings that are located on the center pole or within the tree. Bulb Replacement Instructions 1. Unplug light string from power source. 2. Pull up on the Base Lock unlatching the bulb from the bulb socket. Gently pull the bulb straight out (Figure 15). 3.
PAGE 5
Instrucciones de Montaje IMPORTANTE: Se recomienda conservar la caja para almacenar el producto. Si vas a desechar la caja, anota la información del producto que aparece en los espacios de la parte inferior de esta página para consultas en el futuro. CONTENIDO Instrucciones para dar forma a las ramas . . . . . . . . . Instrucciones de ensamblaje . . . . . . . . . . . . . . . . . . . Conexiones del árbol pre-iluminado . . . . . . . . . . . . . Funcionamiento de las luces Dual Color® . . . . . . . . .
PAGE 6
ATENCIÓN: INSTRUCCIONES DE SEGURIDAD IMPORTANTES LEA Y OBSERVE TODAS LAS INSTRUCCIONES DE SEGURIDAD • No use productos de temporada al aire libre a menos que se indique que son aptos para usar en interiores y al aire libre. Cuando los productos se usan en aplicaciones al aire libre, conecte el producto a un interruptor de circuito de fallas con conexión a tierra (GFCI). Si no se ha proporcionado un GFCI, consulte a un electricista calificado para realizar una instalación correcta.
PAGE 7
Instrucciones de ensamblaje Fig. 7 Fig. 8 Cada caja contiene una sección inferior, una media (los árboles más grandes incluyen secciones medias adicionales), una superior y una base metálica para el árbol. Nota especial sobre los árboles más grandes: Algunos árboles más grandes, de 9 pies (2.7 m) o más altos, incluyen más de una sección media. Si tu árbol tiene más de una sección media, recuerda que cada una estará numerada en orden ascendente.
PAGE 8
ESTILO 4: PowerConnect. Estos árboles no requieren conexión de guirnaldas de luces entre secciones. Las conexiones eléctricas se hacen cuando cada sección está ensamblada. Al ensamblar o desmontar el árbol, NO desconectes ninguna de las guirnaldas de luces conectadas de fábrica en el poste central o dentro del árbol. Instrucciones Para Remplazo de Lámparas 1. Desenchufe el cordón eléctrico de la fuente de energía. 2. Jale de la traba de bombillas (si se incluye) para soltar la bombilla del casquillo.