ASSEMBLY INSTRUCTIONS 60" L-Desk Lot Code # Keep manual for future reference.
IMPORTANT SAFETY INFORMATION WARNING This product is designed and intended for use with computer, fax, and printer equipment only. Improper loading with television or other heavy equipment could cause instability, tip over, and/or serious injury. WARNING Do not load unit without properly attaching back panel. Doing so could cause instability, product collapse, and/or serious injury. No cargue esta unidad sin el panel de atrás.
IMPORTANT SAFETY INFORMATION WARNING Caution, restricting airflow may result in equipment overheating. Vent hole punch outs must be removed to provide adequate venting and cooling of electronic equipment. If power exceeds a maximum recommended wattage of 400 W per shelf location, the door must be left open when in use. Failure to do so could restrict airflow and may result in equipment overheating. Precaución, la restricción del flujo de aire puede provocar el sobrecalentamiento del equipo.
IMPORTANT SAFETY INFORMATION NOTICE ! This product contains a USB charging HUB with pass through capability. It receives power from a USB port. Use of other power sources such as universal type power adaptors will cause damage to the HUB and any devices plugged into the HUB, and void the warranty. • • • DO NOT alter or modify this device. DO NOT use power sources other than 127 USB port with a maximum of 2.0 amp output. DO NOT use universal type power adaptors to power this device.
EXPLODED VIEW A B D G H L E Y X J I M S R W Q C K O P F T U W V O Z N
FASTENERS Fasteners are shown in actual size. los fijadores son demonstrados en su tamaño actual. les attaches sont montrées dans l'échelle grandeur. [8] [ 14 ] #10 x 1-1/4" #10 x 1/2" [4] [ 13 ] M4 x 25mm #8 x 1/2" [6] [ 24 ] #8 x .
HARDWARE [2] [2] Strap Hinge [2] [2] TM Mounting Plate DWR Bracket [2] [2] File Extrusion 16-11/32" (415mm) Drawer Bracket [1] [1] Bumper File Bar 12-1/2" (318mm) [1] [1] File Extrusion 12" (304mm) Lock Clip
HARDWARE 16" Slide Mount [1] CL 16" Slide Mount [1] CR 16" Slide Runner [1] DL 16" Slide Runner [1] DR 16" Slide [2] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MODEL SPECIFIC [1] [2] Handle Door Knob [ 23 ] Cover Cap [2] [1] Handle Door Knob [ 23 ] Cover Cap
ATTENTION Common assembly techniques. Técnica común de ensamblaje. Techniques communes d’assemblage. −Use a screwdriver −Favor de usar un desarmador con el −Utilisez un tournevis avec H72988. −Wood dowel installation. −Instalación del tornillo de madera. −Installation de chevilles de bois. 1 1 2 3 2 4 −Panel to panel attachment. −Fijación de tablero con tablero.
STEP 1 Separate and Install Drawer Slides Slides Must Be Separated Before Assembly. After Separated, Set Aside Until Needed for Assembly. Las diapositivas deben separarse antes del montaje. Después de la separación, déjelo a un lado hasta que sea necesario. Les glissières doivent être séparées avant l'assemblage. Après la séparation, mettez de côté jusqu'au moment de l'assemblage.
STEP 2 16" Slide Mount [3] [1] #8 x 1/2" [6] KD Bolt 16" Slide Mount CL [1] H128624 [3] #8 x .
STEP 3 16" Slide Mount [3] [1] #8 x 1/2" H128624 [3] #8 x .
STEP 4 1 [1] 2 3 KD Cam [3] Wood Dowel 8 x 30 O O Safety glasses Gafas de seguridad Lunettes de protection Z
STEP 5 [1] KD Bolt [8] Wood Dowel 8 x 30 Safety glasses Gafas de seguridad Lunettes de protection M N Z
STEP 6 1 2 [4] KD Cam M N Z E 3
STEP 7 2 1 [4] KD Cam F E 3
STEP 8 [5] [2] KD Bolt Mounting Plate [9] Wood Dowel 8 x 30 C K O Safety glasses Gafas de seguridad Lunettes de protection
STEP 9 2 1 [1] KD Cam O K 3
STEP 10 [4] [1] #8 x 1/2" Wood Dowel 8 x 30 [1] [1] Bumper Lock Clip L Safety glasses Gafas de seguridad Lunettes de protection
STEP 11 1 2 3 4 [4] KD Cam [2] Cover Cap L K C
STEP 12 [6] KD Bolt [2] Wood Dowel 8 x 30 D D Safety glasses Gafas de seguridad Lunettes de protection
STEP 13 1 2 4 3 [4] KD Cam [2] Cover Cap D C
STEP 14 [2] Wood Dowel 8 x 30 [3] KD Bolt J I Safety glasses Gafas de seguridad Lunettes de protection
STEP 15 2 1 [3] KD Cam I J 3
STEP 16 [4] Wood Dowel 8 x 30 H Safety glasses Gafas de seguridad Lunettes de protection [2] KD Cam 2 1 3 [2] Cover Cap H D An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
STEP 17 [3] An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
STEP 18 [3] Wood Dowel 8 x 30 Safety glasses Gafas de seguridad Lunettes de protection G 1 [2] KD Cam [2] Cover Cap An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
STEP 19 [3] #10 x 1" [2] Cover Cap An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
STEP 20 [ 13 ] [2] KD Bolt Strap [4] #10 x 1/2" A B
STEP 21 1 2 3 4 [9] KD Cam [9] Cover Cap A An assistant is required. Es necesario un ayudante. Un assistant est nécessaire.
STEP 22 1 2 3 [4] KD Cam [4] Cover Cap An assistant may be required. Un asistente puede ser necesario. L’aide d’une autre personne peut s’averer necessaire.
STEP 23 [4] #10 x 1/2" A B
STEP 24 [2] TM [2] DWR Bracket Drawer Bracket [6] [3] #10 x 1/2" M4 x 25mm [1] [1] Handle Door Knob Q T
STEP 25 [8] #10 x 1-1/4" H128624 [8] #8 x .
STEP 26 16" Slide Runner [6] [1] Z89901 #8 x .
STEP 27 [2] H94305 [1] File Extrusion 16-11/32" (415mm) File Bar 12-1/2" (318mm) [1] File Extrusion 12" (304mm) H94305 T H94305 U U V
STEP 28 [2] [1] Hinge Door Knob [4] [1] #8 x .
STEP 29 Install and Adjust Hinges A P Adjustment Ajuste Ajustement CAUTION Risk of breaking glass. Handle glass carefully during assembly. Use eye and hand protection. Improper handling can result in cuts or lacerations. Riesgo de romper el vidrio. Maneje el vidrio con cuidado al ensamblar esta unidad. Use protectión para sus ojos y sus manos. El manejo inapropiado del vidrio puede causarle cortaduras o laceraciones. Risque de bris de verre.
STEP 30 QTY [ 1 ] Q T
STEP 31 [ 37 ] Nail 19mm X Y WARNING Caution, restricting airflow may result in equipment overheating. Vent hole punch outs must be removed to provide adequate venting and cooling of electronic equipment. If power exceeds a maximum recommended wattage of 400 W per shelf location, the door must be left open when in use. Failure to do so could restrict airflow and may result in equipment overheating. Precaución, la restricción del flujo de aire puede provocar el sobrecalentamiento del equipo.
STEP 32 DRAWER FRONT VIEW REQUIRED TOOL: PHILLIPS SCREWDRIVER HERRAMIENTA REQUERIDA: DESTORNILLADOR PHILLIPS OUTIL REQUIS: TOURNEVIS CRUCIFORME 1. LOOSEN SCREWS. 2. ADJUST DRAWER FRONTS. 3. TIGHTEN SCREWS. 1. Afloje los tornillos 2. Ajustar frentes de cajón 3. Apriete los tornillos 1. Desserrer les vis 2. Ajuster les façades des tiroirs 3.
STEP 33 Maximum Weight: 200 Lbs. Peso Máximo: 200 Libras Poids Maximum: 90.9 kilogramme Maximum Weight: 15 Lbs. Peso Máximo: 15 Libras Poids Maximum: 6.8 kilogramme Maximum Weight:25 Lbs. Peso Máximo: 25 Libras Poids Maximum: 11.3 kilogramme Maximum Weight: 30 Lbs. Peso Máximo: 30 Libras Poids Maximum: 13.
WARRANTY INFORMATION/INFORMATIONS POUR LA GARANTIE/INFORMACIÓN DE GARANTÍA WRITTEN WARRANTY TO YOU In order to provide you with timely assistance, please thoroughly inspect your furniture for missing or defective parts immediately after opening the carton. To receive replacement or missing parts under this warranty, call our Consumer Service Department. Please have the Model, Part, and Lot Numbers found in the instruction manual available for your reference.
IT’S AS EASY AS 1,2,3 Assembly tips: the instructions and become familiar with the parts. 1. Read 2. Ensure this carton contains all parts, fasteners and hardware. 3. To protect floors, assemble the furniture on the carton. 4. An assistant may be helpful. 5. Use of power tools is not recommended. Conseils d’assemblage: 1. Lisez les instructions et familiarisez-vous avec les pièces. 2. Assurez-vous que le carton contient toutes les pièces, toutes les pièces de fixation et toute la quincaillerie.