FAN LIGHT KIT Product images may vary slightly from actual product.
INSTALLING THE LIGHT KIT REMEMBER to turn off the power before you begin. Step 1. Remove and discard the center plug from the switch housing. Attach the light kit to the switch housing by feeding the light kit wires (black and white) through the hole in the center of the switch housing, then screw the light kit onto the switch housing.
INSTALLING THE LAMP & GLASS SHADE 1. Install the7 watt E26 LED lamp (provided) to the fixture socket. 2. Attach the glass shade to the light fixture by turning the glass shade clockwise. DO NOT OVER TIGHTEN. (Fig. 3) 3. Your installation is now complete. Restore electrical power and enjoy your new ceiling fan light fixture. Turn the power on and check the operation of your light fixture. The pull chain controls the light On-Off. Light kit assembly Lamp Glass shade Fig.
