Instruction manual

Build 31 v31.6.16 Beta
JUNE 22, 2011 © 2007-2011 RED.COM INC.
115
VERIFY CURRENT CAMERA FIRMWARE
There are 2 ways to verify the current level of firmware installed on the camera.
A. During camera boot up when turned on, the current firmware version will be displayed on the cam-
era’s LCD, RED EVF, RED LCD and all external monitors.
B. With the camera ON, press and hold the UNDO button, then press in on the joystick. The camera’s
unique PIN and current firmware version will be displayed on the camera’s LCD.
UPGRADE PROCEDURE
NOTE: MYSTERIUM sensor based cameras may not be downgraded to firmware prior to Build 16,
MYSTERIUM X sensor based cameras, prior to Build 30.
1. To download the latest firmware (Build), go to www.RED.com/support.
2. Click on the desired build link and download to your desktop or directory of your choosing.
NOTE: Before the download starts you will be prompted to enter your account and password or the
camera’s P.I.N.