Instruction manual

Build 31 v31.6.16 Beta

INPUT A/B

Permits the function of GPI A and B to be defined as:

RECORD (Default): Starts standard mode (video and audio) record. Subsequent trigger stops record.

AUTO WB: Initiates automatic white balance of the camera.

MAGNIFY: Performs Image Zoom to aid in adjustments.

PRE-RECORD: activates Pre-record. Subsequent triggers start / stop record. Refer to SYSTEM MENU

CONTROLS > MEDIA MENU > PRE-RECORD for complete information.

TIMELAPSE: Activates Time-lapse. Subsequent trigger activates one-shot or burst recording.

RAMP: Initiates variable frame rate ramp speed change.

SHUT DOWN: Initiates a controlled camera power down

PLAY CLIP: Causes the selected Clip to play back at normal speed

NEXT CLIP: Cues the selected clip to end. If at end, cues to beginning of next clip.

FALSE COLOR: Enables/disables the False Color option. Will display whatever the False Color is set at.

Default is Exposure. Refer to AUDIO/VIDEO MENU CONTROLS > VIEWFINDER > FALSE COLOR for de-

tailed information.

OUTPUT A/B

Permits the function of GPO A and B to be defined as:

RECORDING: Transitions the output of the GPO at the Start and End of a recording.

NOTE: if in Time-lapse mode, GPO will maintain status until Time-lapse mode has been exited.

AUTO WB: Initiates automatic white balance of the camera.

PLAYING: Transitions the output of the GPO when a Clip is playing in Playback mode.

CUED: Transitions the output of the GPO when a Clip is cued for Playback.

POLARITY

This menu permits the signal polarity of GPIO IN 1 and 2 and GPIO OUT 1 and 2 to be defined as either

ACTIVE_LO or ACTIVE_HI.