Specifications

OM-237 881 Page 12
6 Minutes Welding 4 Minutes Resting
3-4. Duty Cycle And Overheating
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, output stops, a Help
message is displayed and cooling fan
runs. Wait fifteen minutes for unit to
cool. Reduce amperage or voltage, or
duty cycle before welding.
. Single Phase Operation: The
unit is supplied with a 8 AWG
power cord. The rated output
with 8 AWG is 300 amps, 32
volts at 40% duty cycle. To
achieve 60% duty cycle change
cord to 6 AWG.
NOTICE − Exceeding duty cycle can
damage unit and void warranty.
60% Duty Cycle
Overheating
0
15
A or V
OR
Reduce Duty Cycle
Minutes
Ref. 216 568-A