Specifications

16
1. Enter "EdI." menu
2. Press [UP] or [DOWN] to select the desired program which you wish to edit and press [ENTER].
3. Press [UP] or [DOWN] to select the desired program step ("S.01" - "S.30") and press [ENTER].
4. Press [UP] or [DOWN] to select the desired item and press [ENTER]-button.Now you can edit by using [UP]
or [DOWN] buttons the DMX values selected item (the list of items depends on selected DMX mode):
"End" - a total number of the program steps (value 1-30).This value you must set before start programming(e.g.
if you want to create program with 10 steps,set "End"=10).
"rE1" - a red LED 1 saturation, value 0-255 ....... "r10" - a red LED 10 saturation, value 0-255
"Gr1" - a green LED 1 saturation, value 0-255 ....... "G10" - a green LED 10 saturation, value 0-255
"bL1" - a blue LED 1 saturation, value 0-255 ....... "b10" - a blue LED 10 saturation, value 0-255
"Vh1" - a white LED 1 saturation, value 0-255 ....... "V10" - a white LED 10 saturation, value 0-255
Following items are common for all zones:
"MAC" - a macro selection,value 0-255
"Str" - a strobe,value 0-255
"dim" - a dimmer,value 0-255
"FA.t." - fade time,value 0-255*
"S.tI." - standing time,value 0-255*
"COP." - copying the current prog. step to the next prog. step.
Press [ENTER]-button to conrm adjusted value.
5. Repeat steps 3 and 4 for next prog. step. If you want to copy current program step to the next prog. step,
select option "COP." and conrm it by pressing [ENTER].
*Both Fade time and Standing time use the same conversion table in order to convert DMX value to the time
value:
DMX Time
[sec.]
DMX Time
[min.]
DMX Time
[min.]
DMX Time
[min.]
DMX Time
[min.]
1 0.1 50 4.2 105 18.4 160 42.7 215 77
2 0.4 55 5 110 20.2 165 45.4 220 80.7
5 2.5 60 6 115 22 170 48.2 225 84.4
10 10 65 7 120 24 175 51 230 88.2
15 22.5 70 8.2 125 26 180 54 235 92
20 40 75 9.4 130 28.2 185 57 240 96
25 62.5 80 10.7 135 30.4 190 60.2 245 100
30 90 85 12 140 32.7 195 63.4 250 104
35 122.5 90 13.5 145 35 200 66.7 255 108
40 160 95 15 150 37.5 205 70
45 202.5 100 16.7 155 40 210 73.5
Exact expression of the time value follows the formula: time[sec.]=(DMX value)
2
/10.
8.3 Manual mode
This menu gives access to the control of the xture channels by means of the control buttons.
Use [UP] and [DOWN] buttons until the display shows "MAn." menu.Press [ENTER] button and by using [UP]
and [DOWN] buttons select desired effect,press [ENTER] and and by using [UP] and [DOWN] buttons adjust
desired DMX value for selected effect.Conrm by [ENTER].
"rE1" - a red LED 1 saturation, value 0-255 ....... "r10" - a red LED 10 saturation, value 0-255
"Gr1" - a green LED 1 saturation, value 0-255 ....... "G10" - a green LED 10 saturation, value 0-255
"bL1" - a blue LED 1 saturation, value 0-255 ....... "b10" - a blue LED 10 saturation, value 0-255
"Vh1" - a white LED 1 saturation, value 0-255 ....... "V10" - a white LED 10 saturation, value 0-255
"MAC" - a macro selection, value 0-255
"Str." - a strobe, value 0-255
"dim." - a dimmer, value 0-255